질문:
How do I use "ping" to check my Oscilloscope’s Ethernet LAN connection is working correctly?
답변:
In Windows 2000 or Windows XP click on Start select Run in the “Open: window” type cmd thenclick OK. At the prompt type ping<space><name or IP address> of the networked computer used to test the connection. Verify the scope sends / receives four packets then at the prompt type exit to close the command window.
Example of a successful test connection:
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 60746
모든 FAQ 보기 »