Question :
How do I use "ping" to check my Oscilloscope’s Ethernet LAN connection is working correctly?
Réponses :
In Windows 2000 or Windows XP click on Start select Run in the “Open: window” type cmd thenclick OK. At the prompt type ping<space><name or IP address> of the networked computer used to test the connection. Verify the scope sends / receives four packets then at the prompt type exit to close the command window.
Example of a successful test connection:
Cette FAQ concerne :
Aucune série du produit
Produit :
Numéro de la FAQ 60746
Afficher toutes les FAQ »