연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

How do I setup TDR on the 11800 series?

질문:

How do I setup TDR on the 11800 series?

답변:

Step 1. Under the UTILITY menu select Initialize.

Step 2. Under the WAVEFORM menu select Sampling Head Fnc's.

Step 3. Under the pop-up menu select TDR Preset.

This should give you a waveform that looks like this:

Waveform 1

Step 4. Add the P6150 probe with the 1X head. Change the time per division to 1 nsec. The screen should now look like this:

Waveform 2

Step 5. Change the time per division to 10 nsec. Short the end of the P6150 to the outer shield and see that the waveform looks something like this:

Waveform 3

Step 6. Connect the probe to the circuit that you need to test. Turn on cursors, set cursor 1 on the first part of the waveform and cursor 2 on the waveform area that represents the average impedance of the device under test.

Waveform 4

Step 7. The cursors should read a) cursor 1- 50 ohm value of the P6150, b) cursor 2 reads the value of the device under test and c) the delta cursor reads the difference.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 57326

모든 FAQ 보기 »