Frequently Asked Questions

FAQ	FAQ ID Sort ascending
What's new in the PQA500 compared to the PQA300? The PQA500 is the next-generation picture quality analyzer which builds on the technology and the success of the PQA300. New features in the PQA500 include:1) Faster analysis than the PQA200 and PQA300.2) Measure any length clip you want (limited … This FAQ Applies to:	62306
What video formats does the PQA500 support? The PQA500 has an optional SDI ingest card which allows it to capture the following SD and HD SDI video formats:SD-SDI525i/59.94, 625i/50HD-SDI 720p/23.98, 720p/50, 720p/59.94, 720p/601080i/50, 1080i/59.94, 1080i/601080psF/25, 1080psF/29.97, 1080psF/30 … This FAQ Applies to:	62301
What test signals are provided in the SPG1000? The following test signals in all supported standards (see question 1 for supported formats): 100% color bars Pluge with white clip indicator Convergence crosshatch with 5% overscan markers 5-Step grey staircase Red field Black, 50% grey, and white … This FAQ Applies to:	62296
What operating systems are supported by the WFMNLE? The WFMNLE is available as a software plug-in application on a selection of AVID Non Linear Editing Systems and is compatible with Windows and Mac. The exact Avid systems and operating systems supported are given below:Avid NLE ApplicationOperating … This FAQ Applies to:	62291
What measurements does the PQA500 perform? The PQA500 can perform PSNR, PQR (same as JND), predicted DMOS (similar to test audience MOS scores) and simulated human attention-weighted versions of the above measurements. These measurements can be made between video clips of any resolution and any … This FAQ Applies to:	62286
What kind of side-by-side rackmount kit do I need for my waveform monitor+ vectorscope or audio monitor? All Tektronix 3RU tall half-rack width video equipment uses the same side-by-side rackmount kit; the WFM7F05; however one of three options will need to be chosen in addition to that base kit depending on the exact instruments you wish to mount:Option OO: … This FAQ Applies to:	62281
What is the replacement for the WVR500? There are a number of replacements for the WVR500 including the WVR6020 (standard definition), WVR7020 (high definition) and the WVR7120 (high definition with advanced capabilities). These instruments can do everything the WVR500 can do plus a great deal … This FAQ Applies to:	62276
What is the replacement battery description for the 1502C and 1503C? The Tektronix part number was 146-0066-00. The generic part is LCR-12V3.4PIt is a 12 Volt, lead acid battery, with dimensions of 5.28"x2.36"x2.6" This FAQ Applies to:	62271
What is the part number of the 62 pin audio connector used on the WFM6000/7000 and WVR6000/7000 products? Our part number is 131-7430 -00. Description is:CONN, DSUB; SLDR CUP, MALE,STR, 62 POS, 0.100 CTR, 30 GOLD. AMPHENOL part number is 17HD-062-P-AM-0-00. This FAQ Applies to:	62266
What is the output timing range and resolution of the SPG422? The field timing moves in field increments (2), the vertical timing moves in line increments (8), the coarse line timing in 27 MHz clock cycle (37 nsec) increments, and the fine timing in This FAQ Applies to:	62261