與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

What pins are used to get LTC into the WFM6000/WFM7000 series monitors?

Subject: Setup & Operation | Published: October 2026 | FAQ ID: KB-02590

Question: What pins are used to get LTC into the WFM6000/WFM7000 series monitors?

Answer: On the 9 pin remote connector, pin 2 is the Time Code Positive, and pin 3 is the Time Code Negative. Pins 1 and 4 are grounds.