與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

On the WFM7020+ for manual timing measurements+ is it possible to get a two line display when using the composite input?

Subject: Setup & Operation | Published: October 2026 | FAQ ID: KB-02651

Question: On the WFM7020+ for manual timing measurements+ is it possible to get a two line display when using the composite input?

Answer: Yes. Follow this procedure:

  • Press and hold the WFM button to get the menu.
  • Select DISPLAY STYLE to be OVERLAY
  • Filters should be set to flat ON, others OFF
  • Press and hold the SWEEP button
  • Select 2 LINE