與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

I cannot proceed past the touch screen calibration on my NetTek Y400.

Subject: Calibration & Repair | Published: October 2026 | FAQ ID: KB-03587

Question: I cannot proceed past the touch screen calibration on my NetTek Y400.

Answer: You must hold your finger (or stylus) motionless, until the crosshairs move to the next location, then repeat this step at the four remaining locations on screen. After a moment, the instrument will continue booting to the Windows operating system.