How do I send an oscilloscope BUS event table file to my PC?

Q: How do I send an oscilloscope BUS event table file to my PC?

Use the following commands: SAVe:EVENTtable:BUS&lt;x&gt; &lt;file path&gt; (stores Bus Event table on the oscilloscope mass storage; CompactFlash card, USB flash drive) FILESystem:READFile &lt;QString&gt; (transfers stored Bus Event table file over the connection to the PC) For complete details on command usage, syntax, arguments, and examples, please download the oscilloscope's programmer manual from http://www.tek.com/downloads

問題：

答案：

Use the following commands:

SAVe:EVENTtable:BUS<x> <file path> (stores Bus Event table on the oscilloscope mass storage; CompactFlash card, USB flash drive)
FILESystem:READFile <QString> (transfers stored Bus Event table file over the connection to the PC)

For complete details on command usage, syntax, arguments, and examples, please download the oscilloscope's programmer manual from http://www.tek.com/downloads

此常見問答集適用於：

產品系列： MSO3000/DPO3000

產品：

常見問答集 ID 59471

檢視所有常見問答集 »