與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

意見回饋

Cable length and signal level readouts in the WFM601M seem to be independent. How are these values determined?

問題:

Cable length and signal level readouts in the WFM601M seem to be independent. How are these values determined?

答案:

In the WFM601M, cable length is determined by comparing energy at several frequencies with the expected roll-off of the selected cable. If you know the cable type, you can tell its approximate length regardless of source signal level.

Source signal level is a measurement of energy at mid-band, modified by the effect of a calculation of the length of the selected cable. If you know the signal level at the source (i.e. 800 mV), you can determine the cable type regardless of length by selecting the type that reads 0 dB. Likewise, if you know the cable type, you can tell the source signal level even if you don't know the length.


此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 59111

檢視所有常見問答集 »