연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

Is there a recommended model or brand of display for use with the WFM/WVR 6xxx/7xxx series?

질문:

Is there a recommended model or brand of display for use with the WFM/WVR 6xxx/7xxx series?

답변:

There are no formally Tektronix recommended brands or models of displays for use with the WFM / WVR 6xxx / 7xxx series. The ports marked "Ext Display" or "XGA Output" should work with any VESA compliant XGA (1024x768 resolution) monitor. To avoid complications arising from frame rate adjustments, the refresh rate of the XGA signal coming from one of these instruments is generally around the frame rate of the currently selected video source (sometimes doubled for slow frame rate sources). This tends to yield a refresh rate such as 50 or 60 Hz which is slower than most computers put out (around 75 Hz) and therefore can cause trouble on some cheaper computer monitors which were only designed to work with PCs and were not tested for full VESA compliance. As long as the monitor you want to use is capable of handling these slower refresh rates it should work just fine with any of these instruments. We also recommend that you use a monitor that has X and Y position controls as this is sometimes required to center an XGA image in the display.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 62766

모든 FAQ 보기 »