Is there a difference in board layout between press-in nut (PIN) and nutbar?

질문:

답변:

Yes, the PIN layout has a slightly larger hole than if you use the nutbar.
3.50 mm (0.138 in) diameter thin PCB with nut bar.
3.73 mm (0.147 in) diameter thick PCB with press in nut.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈: 로직 애널라이저 프로브

제품:

FAQ ID 52941

모든 FAQ 보기 »