연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

Should I use digital averaging or hardware smoothing in my TDR oscilloscope?

질문:

Should I use digital averaging or hardware smoothing in my TDR oscilloscope?

답변:

Both achieve the same goal, which is to filter out the unwanted high-frequency noise and improve our signal-to-noise ratio. Hardware smoothing achieves it through analog filtering of the signal in the oscilloscope hardware, whereas averaging achieves the same goal through software/DSP methods. We prefer to use averaging and ignore smoothing. We like to use about 128 or more averages in the scope; according to the classic DSP book by Oppenheim and Schafer, every time you increase the averaging for a digital signal 2 times; you increase your dynamic range by 3dB. 128 averages give you additional 21dB of dynamic range without making you wait for long averaging process to complete.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 56811

모든 FAQ 보기 »