연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

애플리케이션 노트

Using Step Load Response to Evaluate VRM Stability — Scope Embedded Power Integrity Analysis (SEPIA)

Voltage regulator module and power distribution network stability can be evaluated from the time-domain ringing produced by a fast load-current step. Scope Embedded Power Integrity Analysis (SEPIA) produces quantitative stability measurements without breaking the control loop, inserting an injection resistor, or performing a swept-frequency test.

This application note:

  • Describes challenges associated with using Bode plots and small-signal swept measurements on modern multiphase and high-current power systems
  • Explains how quality factor and equivalent phase margin are derived from a transient ringing waveform
  • Shows how a fast step load, suitable probing, filtering, triggering, and waveform averaging are configured for stability analysis
  • Demonstrates how equivalent inductance, capacitance, and resistance values are extracted for power distribution network modeling
  • Explains how an equivalent-circuit netlist is generated for impedance, phase, and transient-response simulations

Measurements are performed on a 5 Series B Mixed Signal Oscilloscopes equipped with optional Power Distribution Network Measurement and Stability Analysis software. These measurements can also be performed on 4 Series B and 6 Series B MSOs using the same PDN application software. Power rail probes, isolated current probes, load steppers, and an arbitrary/function generator are discussed as components of the measurement system.