연락처
텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능
전화
전화 문의
9:00am-6:00PM KST에 이용 가능
다운로드
매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.
피드백
피드백이 있으신가요? 귀하의 의견을 알려 주십시오.
귀하의 피드백은 Tek.com 경험을 지속적으로 개선하는 데 도움이 됩니다. 문제가 있는지 아니면 당사에서 잘하고 있는지 알려 주시기 바랍니다.
Rambus Direct RIMM Memory Bus Support
- Acquires data from the bus at up to 400 MHz (800 MT/s)
- Acquired Rambus packets are deserialized by the probe adapter and presented to the TLA logic analyzer as full packets.
- Symbolically identifies all bus cycles types
- Acquired data can be linked directly to HLL source files for source level debug
- 500 ps timing resolution enables detailed analysis of setup and hold times, edge-to-edge relationships, control timing, etc.
- All data acquired by the logic analyzer is time stamped to enable accurate time correlation of code execution to other system busses or hardware activity.
Probing
The probe adapter provides a physical connection between a RIMM socket and the logic analyzer probes.
Minimum System Requirements
- TLA7xx mainframe and two modules: one TLA7x3 acquisition module, 102 channels, 100 MHz state, 32K deep (200 MHz state and up to 64M deep available)
- And one TLA7x4 acquisition module, 136 channels, 100 MHz state, 32K deep (200 MHz state and up to 64M deep available)
- qty 7: P6434 high-density mictor probes
- TLA application software version 2.0 or greater
Package Includes
- Instrument setup software including clocking and channel assignments
- Symbol table of all bus cycle names
- User manual
Notes and Exceptions
Acquisition modules must be installed in adjacent mainframe slots and merged. If using a combination of 102-channel and 136-channel modules, the 102-channel module must be installed in the higher numbered slot. Reference full manual for probe adapter installation.
Ordering Information
device description product number Rambus support (software and manual) TMS810 add Rambus probe adapter (REQUIRED) TMS810 (opt 01) add qty 7: P6434 high-density mictor probes TMS810 (opt 21) For information on availability and pricing, contact your Account Manager.
For technical questions, please contact the Tektronix Support Center.