연락처
텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능
전화 문의
9:00am-6:00PM KST에 이용 가능
다운로드
매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.
피드백
Real-Time Spectrum Analyzer Software Options
Measurement Software Options for RSA3408A • RSA3303A • RSA3308A
이 데이터 시트의 제품은 텍트로닉스에서 더 이상 판매하지 않습니다.
리퍼브 테스트 장비에 대한 Tektronix Encore를 확인하십시오.
이러한 제품에 대한 지원 및 보증 상태를 살펴보십시오.
![](/-/media/datasheets/a0005695sjpg.jpg?h=110&iar=0&w=200)
Features & Benefits
- Trigger
- Tektronix Exclusive Frequency Mask Trigger Makes Event-based Capture of Transient RF Signals Easy by Triggering on Any Change in the Frequency Domain
- Capture
- All Input Signals up to 36 MHz*1 Spans are Seamlessly Captured Into Memory
- Long Record Length Enables Complete Analysis Over Time Without Making Multiple Acquisitions
- Interfaces with TekConnect® Probes for RF and Baseband Probing
- Analyze
- Analyze Frequency, Amplitude, and Modulation Over Time
- Multi-domain Analysis Enables Fast, Complete Signal Analysis in Frequency, Time, Code, and Modulation Domains
- General Purpose Digital Modulation Analysis
- 802.11a/b/g/n Measurement Suite
- Codogram Provides a Simple, Graphical Means of Analyzing Individual Code Powers versus Time
- Key Signaling Analysis Over Air Interface Enables Checking Interaction between Base station and UE
- Signal Source Analysis Simplifies Phase Noise, Jitter, and Frequency Settling Measurements
Applications
- W-CDMA
- HSUPA
- HSDPA
- GSM/EDGE
- CDMA2000 1x
- CDMA2000 1xEV-DO
- TD-SCDMA
- RFID
- Phase Noise
- Jitter
- IEEE 802.11 a/b/g/n WLAN
- IEEE 802.15.4 OQPSK (Zigbee)
- P25 (C4FM signal analysis )
- Digital Modulation Analysis
*1 RSA3408A: 36 MHz RF, 40 MHz Baseband; RSA3300A: 15 MHz RF, 20 MHz Baseband.
Trigger, Capture, Analyze
See frequency, amplitude and modulation change over time. With only a single acquisition, Real-Time Spectrum Analyzers (RTSA) capture a continuous time record of changing RF events and enable time-correlated analysis in the Frequency, Time, and Modulation domains. You get the functionality of a vector signal analyzer, a wide band spectrum analyzer, plus the unique trigger-capture-analyze capability of RTSA — in one package. Optional application-focused software allows you to tailor the advanced characterization and troubleshooting tools of the RTSA to meet the needs of your specific application.
|
RSA3303/8A |
RSA3408A |
---|---|---|
General Purpose Modulation |
Opt. 21 |
Opt. 21 |
W-CDMA Uplink |
|
Opt. 23 |
GSM/EDGE |
|
Opt. 24 |
CDMA 1X Forward/Reverse Link |
|
Opt. 25 |
1X EVDO Forward/Reverse Link |
|
Opt. 26 |
3GPP Release 5 Downlink (HSDPA) |
|
Opt. 27 |
3GPP Release 6 (HSUPA)*2 |
|
Opt. 40 |
TD-SCDMA |
|
Opt. 28 |
WLAN 802.11a/b/g/n |
|
Opt. 29 |
*2 For 3GPP Release 6 (HSUPA) analysis, opt 23, 27 are required in addition to opt 40.
Characteristics
Opt. 21 – Advanced Measurement Suite
Modulation Format - BPSK, QPSK, OQPSK, π/4 - DQPSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, GMSK, GFSK, ASK, FSK, DSB-ASK, OOK, PR-ASK, SSB-ASK, Subcarrier OOK, Subcarrier BPSK, C4FM (Fixed symbol rate).
Maximum Symbol Rate -
RSA3408A: 51.2 MS/s
Parameter Presets - PDC, PHS, NADC, TETRA, GSM, CDPD, Bluetooth, IEEE 802.15.4 OQPSK (Zigbee), P25.
Vector Diagram Display Format - Symbol Locus Display, Frequency Error and Origin Offset Measurement.
Constellation Diagram Display Format - Symbol Display, Frequency Error and Origin Offset Measurement.
Eye Diagram Display Format - I/Q/Trellis Display (1 to 16 symbols).
Error Vector Diagram Display Format - EVM, Magnitude Error, Phase Error, Waveform Quality (ρ), Frequency Error, and Origin Offset Measurement.
Coding Format - NRZ-L (8 periods), NRZ-L (4 periods), NRZ-L (2 periods), PWM, Bit Cell, Miller, Modified Miller, Miller (M_2), Miller (M_4), Miller (M_8), Manchester, NRZ.
Symbol Table Display Format - Binary, Octal, Hexadecimal.
Signal Source Analysis - Phase Noise, Jitter, and Automated Frequency Settling Measurement.
RFID Standards - ISO/IEC 18000 Part 4 Mode 1.
ISO/IEC 18000 Part 6 Type A, B, C.
ISO/IEC 18092
ISO/IEC 14443 Part 2 Type A, B
EPC Global Generation 1 Class 0, Class 1
Digital Demodulation
GMSK (1 MHz Span) - EVM ≤1.8%, Magnitude Error ≤1.2%, Phase Error ≤1.0°
64QAM, 5.3 MS/s 1 GHz Carrier (15 MHz Span) - EVM ≤2.5% (typical).
QPSK, 3.84 MS/s 2 GHz Carrier (15 MHz Span) - EVM ≤2.5% (typical).
Characteristics |
RSA3408A |
---|---|
QPSK EVM CF = 2 GHz (typical value) |
0.5% (at 100 kS/s) 0.5% (at 1 MS/s) 0.6% (at 4 MS/s) 0.9% (at 10 MS/s) |
Signal Source Analysis
STABILITY
RSA3408A
Noise Sidebands, dBc/Hz
Offset |
At 1 GHz CF |
At 2 GHz CF |
At 6 GHz CF |
|||
---|---|---|---|---|---|---|
|
Spec |
Typical |
Spec |
Typical |
Spec |
Typical |
1 kHz |
-105 |
-107 |
-103 |
-105 |
-97 |
-99 |
10 kHz |
-110 |
-112 |
-109 |
-111 |
-106 |
-108 |
20 kHz |
-110 |
-112 |
-109 |
-111 |
-106 |
-108 |
30 kHz |
-110 |
-112 |
-109 |
-111 |
-106 |
-108 |
100 kHz |
-112 |
-115 |
-112 |
-115 |
-111 |
-113 |
1 MHz |
-132 |
-135 |
-132 |
-135 |
-132 |
-134 |
5 MHz |
-138 |
-140 |
-138 |
-140 |
-137 |
-139 |
7 MHz |
-138 |
-140 |
-138 |
-140 |
-137 |
-139 |
10 MHz |
-138 |
-140 |
-138 |
-140 |
-137 |
-139 |
STABILITY
RSA3308A/3303A
Noise Sidebands, dBc/Hz
Offset |
At 1 GHz CF |
At 2 GHz CF |
At 6 GHz CF |
|||
---|---|---|---|---|---|---|
|
Spec |
Typical |
Spec |
Typical |
Spec |
Typical |
1 kHz |
-100 |
-107 |
-96 |
-99 |
-87 |
-90 |
10 kHz |
-105 |
-112 |
-104 |
-107 |
-104 |
-107 |
20 kHz |
-105 |
-112 |
-105 |
-108 |
-105 |
-108 |
30 kHz |
-105 |
-112 |
-105 |
-108 |
-105 |
-108 |
100 kHz |
-112 |
-115 |
-112 |
-115 |
-112 |
-115 |
1 MHz |
-132 |
-135 |
-132 |
-135 |
-128 |
-131 |
5 MHz |
-135 |
-140 |
-135 |
-138 |
-130 |
-133 |
7 MHz |
-135 |
-140 |
-135 |
-138 |
-130 |
-133 |
Frequency Settling Time
RSA3408A (typical)
Input Power - –5 dBm
RF Attenuator - 0 dB
Smoothing Factor - 1
Span - ≥10 MHz
Input Frequency - 100 MHz – 101 MHz
Frequency Settling Threshold - 100 kHz
Span - 100 kHz
Input Frequency - 10 MHz – 10.01 MHz
Frequency Settling Threshold - 1 kHz
Span (Hz) |
Error Frequency Settling Time |
Error Frequency Settling Time From Trigger |
---|---|---|
36 MHz |
60 ns |
100 ns |
10 MHz |
240 ns |
240 ns |
100 KHz |
19 μs |
19 μs |
RSA3300A Series (typical)
Input Power - –5 dBm
RF Attenuator - 0 dB
Smoothing Factor - 1
Span - ≥10 MHz
Input Frequency - 100 MHz – 101 MHz
Frequency Settling Threshold - 100 KHz
Span - 100 kHz
Input Frequency - 10 MHz – 10.01 MHz
Frequency Settling Threshold - 1 kHz
Span (Hz) |
Error Frequency Settling Time (S) |
Error Frequency Settling Time From Trigger (S) |
---|---|---|
15 MHz |
160 ns |
40 ns |
10 MHz |
240 ns |
80 ns |
100 kHz |
19 μs |
13 μs |
Opt. 23 - W-CDMA Uplink Analysis
Perform key measurements for 3GPP TS34.121 including PRACH analysis capability.
Supports the following measurements - Constellation, EVM, Eye Diagram, Symbol Table, CDP Spectrogram, CDP vs. Short Code, CDP vs. Symbol, CDP vs. Time Slot, Symbol Constellation, Symbol EVM, Symbol Eye Diagram.
Supports W-CDMA uplink signals - DPDCH 9 Dedicated Physical Data Channel/DPCCH (Dedicated Physical Control Channel), PRACH (Physical Random Access Data Channel), PCPCH (Physical Common Packet Channel).
Opt. 24 - GSM/EDGE Analysis Software
Perform key measurements for ETSI TS 100 910 and 3GPP TS45.005.
Burst Type: Normal
Characteristics |
Description |
---|---|
Modulation accuracy measurement |
|
Mean power measurement |
|
Power versus time measurement |
|
Modulation spectrum measurement |
|
Switching spectrum measurement |
|
Carrier power range |
–30 to +30 dBm |
Phase error measurement accuracy for GMSK modulation (typical) |
≤0.8° (RMS) ≤1.8° (Peak) |
Phase error resolution |
0.01° |
EVM measurement accuracy for 8-PSK modulation (typical) |
≤0.9% (RMS) |
EVM resolution |
0.01% |
Time resolution |
0.15625 μs at 5 MHz span |
Burst count |
1000 maximum |
RF input range |
-50 dBm to +30 dBm |
Absolute power measurement accuracy for GSM900 at 20 °C to 30 °C, excluding mismatch error (typical) |
±0.5 dB Signal frequency: 880 MHz – 960 MHz, Signal power: +10 dBm to –30 dBm, RF attenuator: 0 dB – 20 dB, after auto level is performed at 5 MHz span |
Absolute power measurement accuracy for DCS1800/PCS1900 at 20 °C to 30 °C, excluding mismatch error (typical) |
±0.6 dB Signal frequency: 1710 MHz – 1990 MHz, Signal power: +10 dBm to –30 dBm, RF attenuator: 0 dB to 20 dB, after auto level is performed at 5 MHz span |
Resolution |
0.01 dB |
Burst count |
1000 maximum |
RF input range |
–50 dBm to +30 dBm |
Power ramp relative accuracy (typical) |
±0.2 dB at 0 dBfs to –40 dBfs |
Time resolution (typical) |
0.15625 μs at 5 MHz span |
Marker amplitude resolution |
0.001 dB |
Burst count |
1000 maximum |
Carrier power range |
–5 dBm to +30 dBm |
Dynamic range for GMSK modulation (typical) |
82 dB at 600 kHz offset (30 kHz RBW) 86 dB at 1.2 MHz offset (30 kHz RBW) 83 dB at 1.8 MHz offset (100 kHz RBW) 85 dB at 6 MHz offset (100 kHz RBW) |
Dynamic range for 8-PSK modulation (typical) |
82 dB at 600 kHz offset (30 kHz RBW) 85 dB at 1.2 MHz offset (30 kHz RBW) 83 dB at 1.8 MHz offset (100 kHz RBW) 83 dB at 6 MHz offset (100 kHz RBW) |
Burst count |
1000 maximum |
Carrier power range |
–5 dBm to +30 dBm |
Dynamic range for GMSK modulation (typical) |
75 dB at 400 kHz offset (30 kHz RBW) 80 dB at 600 kHz offset (30 kHz RBW) 84 dB at 1.2 MHz offset (30 kHz RBW) 88 dB at 1.8 MHz offset (30 kHz RBW) |
Dynamic range for 8-PSK modulation (typical) |
75 dB at 400 kHz offset (30 kHz RBW) 80 dB at 600 kHz offset (30 kHz RBW) 84 dB at 1.2 MHz offset (30 kHz RBW) 88 dB at 1.8 MHz offset (30 kHz RBW) |
Burst count |
1000 maximum |
Opt. 25 – cdma2000 1xSignal Analysis Software
Perform key measurements for cdma2000 forward link (3GPP2 C.S0010) and reverse link (3GPP2 C.S0011).
cdma2000 1x Forward Link
Characteristics |
Description |
---|---|
ACPR |
|
CCDF |
|
Intermodulation distortion |
|
Occupied bandwidth |
|
Spectrum emission mask |
|
Code domain power |
|
QPSK EVM |
|
Modulation Accuracy (composite) |
|
Channel power |
|
Minimum power at RF input |
–50 dBm |
Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.6 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz, Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span. |
Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.2 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz, Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span, 0 dBm input. |
Resolution |
0.01 dB |
Minimum carrier power at RF input |
–40 dBm |
Dynamic range 765 kHz offset 1.995 MHz offset 3.125 MHz offset 4 MHz offset |
At –5 dBm signal input 76 dB (30 kHz BW) 81 dB (30 kHz BW) 81 dB (30 kHz BW) 82 dB (30 kHz BW) |
Histogram resolution |
0.01 dB |
Measurement filter |
Rectangular, Root Nyquist, Nyquist, and Gaussian |
Minimum carrier power at RF input |
–50 dBm |
Measurement accuracy |
0.2% |
Minimum carrier power at RF input |
–5 dBm |
Dynamic range 1.995 MHz offset |
82 dB (30 kHz BW) |
Relative code domain power accuracy |
±0.15 dB/±0.075 dB (typical) |
Minimum carrier power at RF input |
–40 dBm |
EVM floor, typical |
2.0% |
Minimum carrier power at RF input |
–40 dBm |
Composite EVM floor, typical |
2.0% |
Rho (ρ) |
0.999 |
Frequency error accuracy |
±10 Hz + center frequency accuracy |
Timing accuracy (tau) |
±250 ns |
cdma2000 1x Reverse Link
Characteristics |
Description |
---|---|
Channel power |
|
ACPR |
|
CCDF |
|
Occupied bandwidth |
|
Spectrum emission mask |
|
Code domain power |
|
QPSK EVM |
|
Modulation Accuracy (composite) |
|
Minimum power at RF input |
–50 dBm |
Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.6 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span. |
Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.2 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to -30 dBm after auto level is performed at 10 MHz span, 0 dBm input. |
Resolution |
0.01 dB |
Minimum carrier power at RF input |
–40 dBm |
Dynamic range 900 kHz offset 1.995 MHz offset 3.125 MHz offset 4 MHz offset |
At –5 dBm signal input 76 dB (30 kHz BW) 81 dB (30 kHz BW) 81 dB (30 kHz BW) 82 dB (30 kHz BW) |
Histogram resolution |
0.01 dB |
Intermodulation distortion |
|
Measurement filter |
Rectangular, Root Nyquist, Nyquist, and Gaussian |
Minimum carrier power at RF input |
–50 dBm |
Measurement accuracy |
0.2% |
Minimum carrier power at RF input |
–5 dBm |
Dynamic range 1.995 MHz offset |
82 dB (30 kHz BW) |
Relative code domain power accuracy |
±0.15 dB/±0.075 dB (typical) |
Minimum carrier power at RF input |
–40 dBm |
EVM floor, typical |
2.0% |
Minimum carrier power at RF input |
–40 dBm |
Composite EVM floor, typical |
2.0% |
Rho (ρ) |
0.999 |
Frequency error accuracy |
±10 Hz + center frequency accuracy |
Opt. 26 – 1xEV-DO Signal Analysis Software
Perform key measurements for 1xEV-DO forward link (3GPP2 C.S0032) and reverse link (3GPP2 C.S0033).
1xEV-DO Forward Link
Characteristics |
Description |
---|---|
Channel power |
|
CCDF |
|
Intermodulation distortion |
|
Occupied bandwidth |
|
ACPR |
|
Spectrum emission mask |
|
QPSK EVM |
|
Modulation Accuracy (composite) |
|
Minimum power at RF input |
–50 dBm |
Absolute power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.6 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span. |
Relative power measurement accuracy (at 20 °C to 30 °C, excluding mismatch error), typical |
±0.2 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to -30 dBm after auto level is performed at 10 MHz span, 0 dBm input. |
Resolution |
0.01 dB |
Histogram resolution |
0.01 dB |
Measurement filter |
Rectangular, Root Nyquist, Nyquist, and Gaussian |
Minimum carrier power at RF input |
–50 dBm |
Measurement accuracy |
0.2% |
Minimum carrier power at RF input |
–40 dBm |
Dynamic range 765 kHz offset 1.995 MHz offset 3.125 MHz offset 4 MHz offset |
At –5 dBm signal input 76 dB (30 kHz BW) 81 dB (30 kHz BW) 81 dB (30 kHz BW) 82 dB (30 kHz BW) |
Minimum carrier power at RF input |
–5 dBm |
Dynamic range 1.995 MHz offset |
82 dB (30 kHz BW) |
Code domain power |
|
Relative code domain power accuracy |
±0.15 dB/±0.075 dB (typical) |
Minimum carrier power at RF input |
–40 dBm |
EVM floor, typical |
2.0% |
Minimum carrier power at RF input |
–40 dBm |
Composite EVM floor, typical |
2.0% |
Rho (ρ) |
0.999 |
Frequency error accuracy |
±10 Hz + center frequency accuracy |
Timing accuracy (tau) |
±250 ns |
1xEV-DO Reverse Link
Characteristics |
Description |
---|---|
Channel power |
|
CCDF |
|
Intermodulation distortion |
|
Occupied bandwidth |
|
Spectrum emission mask |
|
Code domain power |
|
Modulation Accuracy (composite) |
|
Minimum power at RF input |
–50 dBm |
Absolute power measurement accuracy (at 20 to 30 °C, excluding mismatch error), typical |
±0.6 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to –50 dBm after auto level is performed at 10 MHz span. |
Relative power measurement accuracy (at 20 to 30 °C, excluding mismatch error), typical |
±0.2 dB at conditions below: Signal frequency: 824 – 960 MHz or 1750 – 2170 MHz Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span, 0 dBm input. |
Resolution |
0.01 dB |
Histogram resolution |
0.01 dB |
Measurement filter |
Rectangular, Root Nyquist, Nyquist, and Gaussian |
Minimum carrier power at RF input |
–50 dBm |
Measurement accuracy |
0.2% |
ACPR |
|
Minimum carrier power at RF input |
–40 dBm |
Dynamic range 765 kHz offset 1.995 MHz offset 3.125 MHz offset 4 MHz offset |
At –5 dBm signal input 74 dB (30 kHz BW) 83 dB (30 kHz BW) 83 dB (30 kHz BW) 84 dB (30 kHz BW) |
Minimum carrier power at RF input |
–5 dBm |
Dynamic range 1.995 MHz offset |
82 dB (30 kHz BW) |
Relative code domain power accuracy |
±0.15 dB/±0.075 dB (typical) |
QPSK EVM |
|
Minimum carrier power at RF input |
–40 dBm |
EVM floor, typical |
2.0% |
Minimum carrier power at RF input |
–40 dB |
Composite EVM floor, typical |
2.0% |
Rho (ρ) |
0.999 |
Frequency error accuracy |
±10 Hz + center frequency accuracy |
Opt. 27 – 3GPP Release 5 Downlink (HSDPA) Analysis Software
Perform key measurements for 3GPP TS25.141 v5.7.0
3GPP-R5 Downlink
Characteristics |
Description |
---|---|
Channel power measurement |
|
ACLR measurement |
|
Modulation Format |
QPSK, 16QAM auto detection |
Minimum power at RF input |
–50 dBm |
Absolute power measurement accuracy (typical) |
±0.6 dB at 20 °C to 30 °C, excluding mismatch error Signal frequency: 1900 – 2200 MHz Signal power: +10 dBm to –30 dBm after auto level is performed at 10 MHz span. |
Relative Power Measurement Accuracy (typical) |
±0.2 dB at 20 °C to 30 °C, excluding mismatch error Signal frequency: 1900 – 2200 MHz Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span. |
Resolution |
0.01 dB |
Minimum carrier power at RF input |
–40 dBm |
Dynamic range |
Test model 1, 16 ch, input power >–5 dBm 60 dB, typically 66 dB (5 MHz offset) 63 dB, typically 70 dB (10 MHz offset) |
CCDF measurement |
|
Histogram Resolution |
0.01 dB |
OBW (Occupied Bandwidth) measurement |
|
Minimum carrier power at RF input |
–50 dBm |
Measurement accuracy |
0.2% (5 MHz Span, 1000 times averaging) |
Spectrum emission mask |
|
Dynamic range |
82 dB (30 kHz BW, Input Power >–5 dBm, 5 MHz offset) |
Code domain power |
|
Relative accuracy of code domain power accuracy |
±0.15 dB, typically ±0.075 dB Using Test Model 5, Total Power = 0 dBm, Code Level >–15 dB |
QPSK EVM (Pilot Channel Only) |
|
Minimum carrier power at RF input |
–60 dBm (EVM <9 %) |
EVM floor (typical) |
2.0% (Input Power >–40 dBm, 10 times averaged) |
Modulation Accuracy (Composite, Test Model 5) |
|
Minimum carrier power at RF input |
–60 dBm (EVM < 9%) |
Composite EVM floor (typical) |
2.5 % (Input Power > –40 dBm, 10 times averaged) |
Frequency error accuracy |
±10 Hz + (center frequency accuracy) |
Modulation accuracy (Composite, Alternate Scrambling Code) |
|
Minimum carrier power at RF input |
–60 dBm (EVM <9%) |
Composite EVM floor (typical) |
2.5% (Input Power >–40 dBm, 10 times averaged) |
Frequency error accuracy |
±10 Hz + (center frequency accuracy) |
3GPP-R5 Uplink
Characteristics |
Description |
---|---|
ACK/NACK Analysis |
|
Code domain power |
|
ACK/NACK Analysis Function |
ACK/NACK/DTX detection, CQI decode |
Relative accuracy of code domain power accuracy |
±0.15 dB, typically ±0.075 dB (Total Power = 0 dBm, Code Level >–15 dB ) |
Opt. 28 – 3GPP Release 4 Downlink and Uplink (TD-SCDMA)
Perform key measurements for TS25.102 (UL), 3GPP TS25.142 (DL)
Characteristics |
Description |
---|---|
General |
|
Channel power measurement |
|
ACLR Measurement |
|
CCDF Measurement |
|
Code domain analysis |
|
Modulation and frequency related |
|
Frequency range |
1850 – 2050 MHz |
Minimum power at RF input |
–60 dBm |
Absolute power measurement accuracy (typical, after auto-level performed, excluding mismatch error, 5 MHz span) |
±0.6 dB (Signal power +10 dBm to –30 dBm, 20 to 30 °C) |
Relative power measurement accuracy (typical, after auto-level performed, excluding mismatch error, 5 MHz span) |
±0.2 dB (Signal power +0 dBm to –30 dBm, 20 to 30 °C) |
Resolution |
0.01 dB |
Dynamic range |
(8 active DPCH, Timeslots 4, 5, 6), input power >–20 dBm 60 dB, 1.6 MHz offset 61 dB, 3.2 MHz offset |
Histogram resolution |
0.01 dB |
Relative code domain power accuracy |
Input power > –40 dBm ±0.15 dB (±0.075 typical) at code power >–10 dBc ±0.30 dB (±0.15 typical) at code power >–25 dBc |
Code domain residual error |
<–40 dB (Input power >–40 dBm) |
Modulation format |
QPSK |
Residual EVM floor |
≤1.5%, input level >–40 dBm (1 DPCH in timeslots 4, 5, and 6) |
Residual origin offset |
≤–40 dB, input level >–40 dBm (1 DPCH in timeslots 4, 5, and 6) |
Frequency error accuracy |
±10 Hz + (center frequency accuracy) |
Frequency lock range |
±4 kHz from defined carrier frequency (input level >–40 dBm) |
Other measurements |
Occupied BW (OBW) Spectrum Emissions Mask (offset from carrier and inband, ungated) |
Opt. 29 – IEEE 802.11 a/b/g/n Analysis Software
Characteristics |
Description |
---|---|
Residual EVM for IEEE802.11a/g/n 54 Mb/s OFDM (typical) |
≤–44 dB at 2.447 GHz center frequency, ≤–42 dB at 5.5 GHz center frequency |
Residual EVM for IEEE802.11b 11 Mbps CCK with Raised cosine filter (typical) |
≤0.7% at 2.447 GHz center frequency |
Residual EVM against Frequency Offset (±10 MHz), OFDM signal conforming to IEEE802.11g, 16.6 MHz BW, 52 sub carriers, 64 QAM, 54 Mb/s, with long training symbol correction (typical) |
≤–41 dB, Center Frequency of the Analyzer is 5.0 to 6.0 GHz, Carrier Center is ±10 MHz apart from the Center Frequency setting |
Residual EVM for Draft IEEE 802.11n SISO in Green Mode using 16QAM and Long Training Symbol1 (typical) |
≤–46 dB at 2.447 GHz center frequency and 20 MHz bandwidth ≤–42 dB at 2.447 GHz center frequency and 40 MHz bandwidth |
Residual EVM for Draft IEEE 802.11n MIMO in Green Mode using 16QAM and Long Training Symbol1 (typical) |
≤–42 dB at 2.447 GHz center frequency, 20 MHz bandwidth and channel model A ≤–44 dB at 2.447 GHz center frequency, 20 MHz bandwidth and channel model B ≤–42 dB at 2.447 GHz center frequency, 40 MHz bandwidth and channel model A ≤–41 dB at 2.447 GHz center frequency, 40 MHz bandwidth and channel model B |
*1 Measurement performance for RSA3408A only.
IEEE 802.11 Measurements
Measurements |
Measurement Contents |
802.11a |
802.11b |
802.11g |
802.11n |
---|---|---|---|---|---|
Power Analysis |
|
|
|
|
|
Transmission Analysis |
|
|
|
|
|
Modulation Analysis |
|
|
|
|
|
EVM vs. Time |
EVM |
X |
X |
X |
X |
|
Magnitude Error |
X |
X |
X |
X |
|
Phase Error |
X |
X |
X |
X |
Power vs. Time |
— |
X |
X |
X |
X |
Constellation |
— |
X |
X |
X |
X |
EVM vs. SC |
EVM |
X |
X |
X |
X |
|
Magnitude Error |
X |
X |
X |
X |
|
Phase Error |
X |
X |
X |
X |
Power vs. SC |
— |
X |
X |
X |
X |
SC Constellation |
— |
X |
X |
X |
X |
Frequency Error |
— |
X |
X |
X |
X |
OFDM Flatness |
— |
X |
— |
X |
X (SISO only) |
OFDM Linearity |
— |
X |
— |
X |
X (SISO only) |
Symbol Table |
— |
X |
X |
X |
X |
2 x 2 MIMO Signal Analysis |
— |
— |
— |
— |
X |
Spectrum Mask |
— |
X |
— |
X |
X |
Transmit Power |
— |
— |
X |
X |
— |
Transfer Function vs. Time |
— |
— |
— |
— |
X |
Delay Profile vs. Time |
— |
— |
— |
— |
X |
Opt. 40 – 3GPP Release 6 (HSUPA) Analysis Software
Perform key measurements for 3GPP TS25.211 v6.7.0, TS25.212 v6.8.0, TS25.213 v6.5.0
3GPP-R6 Uplink
Characteristics |
Description |
---|---|
Code domain power |
|
Modulation Accuracy (Configuration 2) |
|
Modulation Format |
Channel detection, IQ split analysis |
Channel power measurement |
|
Minimum power at RF input |
–50 dBm |
Relative Power Measurement Accuracy (typical) |
±0.2 dB at 20 °C to 30 °C, excluding mismatch error Signal frequency: 1900 – 2200 MHz Signal power: 0 dBm to –30 dBm after auto level is performed at 10 MHz span. |
Resolution |
0.01 dB |
Relative accuracy of code domain power accuracy |
±0.15 dB, typically ±0.075 dB Using Configuration 2, Total Power = 0 dBm, Code Level >–15 dB |
QPSK EVM (Pilot Channel Only) |
|
Minimum carrier power at RF input |
–60 dBm (EVM <9 %) |
EVM floor (typical) |
2.0% (Input Power >–40 dBm, 10 times averaged) |
Minimum carrier power at RF input |
–60 dBm (EVM < 9%) |
Composite EVM floor (typical) |
2.5 % (Input Power > –40 dBm, 10 times averaged) |
Frequency error accuracy |
±10 Hz + (center frequency accuracy) |
3GPP-R6 Uplink and Downlink Analysis
Characteristics |
Description |
---|---|
Uplink |
|
Uplink Signaling Analysis |
|
Downlink |
|
Downlink Signaling Analysis |
|
Phase discontinuity |
Result of Phase Discontinuity in accordance with 3GPP standard TS25.101(V6.9.0) 6.8.4 |
Gain Ratio over time |
Power ratio % over time |
Modulation Accuracy over Time |
EVM, Mag error, Phase error, PCDE, Frequency error, Origin offset, Phase discontinuity over time |
HS-DPCCH Analysis |
ACK/NACK/PRE/POST/DTX detection, CQI decode |
E-DPCCH Analysis |
RSN/E-TFCI/HAPPY decode |
DPCCH |
TPC, TFCI decode |
Modulation Accuracy over Time |
EVM, Mag error, Phase error, PCDE, Frequency error, Origin offset over time |
E-RGCH (E - Relative Grant Channel) Analysis |
UP/HOLD/DOWN detection |
E-HICH (E–Hybrid ARQ Indicator Channel) Analysis |
ACK/NACK decode |
E-AGCH Analysis |
AGV/AGS decode |
Ordering Information
RSA3408A
Product Options
Opt. 21 - Advanced Measurement Suite Software.
Opt. 23 - W-CDMA Uplink Analysis Software.
Opt. 24 - GSM/EDGE Analysis Software.
Opt. 25 - cdma2000 1x Analysis Software.
Opt. 26 - 1xEV-DO Analysis Software.
Opt. 27 - 3GPP Release 5 Downlink (HSDPA) Analysis Software.
Opt. 28 - TD-SCDMA Analysis Software.
Opt. 29 - WLAN 802.11 a/b/g/n Analysis Software.
Opt. 40 - 3GPP Release 6 (HSUPA) Analysis Software*3.
*3 Options 23 and 27 are required for 3GPP Release 6 analysis in addition to Opt. 40
Upgrade Options
RSA34UP21 - Advanced Measurement Suite Upgrade (customer-installable).
RSA34UP23 - W-CDMA Uplink Analysis Upgrade (customer-installable).
RSA34UP24 - GSM/EDGE Analysis Upgrade (customer-installable).
RSA34UP25 - cdma2000 1x Analysis Upgrade (customer-installable).
RSA34UP26 - 1xEV-DO Analysis Upgrade (customer-installable).
RSA34UP27 - 3GPP Release 5 Downlink (HSDPA) Analysis Upgrade (customer-installable).
RSA34UP28 - TD-SCDMA Analysis Upgrade (customer-installable).
RSA34UP29 - WLAN 802.11 a/b/g/n Analysis Upgrade (customer-installable).
RSA34UP40 - 3GPP Release 6 (HSUPA) Analysis Software Upgrade (customer-installable)*4.
*4 Options 23 and 27 are required for 3GPP Release 6 analysis in addition to Opt. 40
RSA3303A, RSA3308A
Product Options
Opt. 21 - Advanced Measurement Suite Software.
Upgrade Options
RSA3UP21 - Advanced Measurement Suite Upgrade (customer-installable).