Frage:
If I select the FG mode on my AWG+ what is the maximum frequency that can be selected?
Antwort:
In FG mode, an AWG is outputting pre-defined waveform data. To maintain a minimum level of waveform quality there is a limit of 10 or 100 points per cycle, depending on the model. This means that the maximum clock rate of the instrument would be divided by 10 or 100 to determine the maximum frequency of a function generator mode waveform. See table below.
Model Max Clock Max FG freq.
AWG4X0 200 MHz 20 MHz
AWG5X0 1 GHz 100 MHz
AWG610 2.6 GHz 260 MHz
AWG615 2.7 GHz 270 MHz
AWG710 4.0 GHz 400 MHz
AWG710B 4.0 GHz 400 MHz
Diese FAQs beziehen sich auf:
Keine Produktreihe
Produkt:
FAQ-ID 56696
Alle FAQs ansehen »