PAM4 Software for Emerging OIF-CEI and IEEE PAM4 Standards
Tektronix, at the leading edge of signal fidelity, works in collaboration with datacom engineers and standards organizations to help pioneer the measurement techniques needed to perform PAM4 Tx and Rx characterization up to 112Gbps/56Gbaud for emerging OIF-CEI and IEEE PAM4 standards.
PAM4 software for the MSO/DPO70000 (C/DX/SX) series:
- Opt. PAM4 - Comprehensive PAM4 analysis and debug including jitter, noise, BER, SNDR and more. See datasheet »
- Opt. 400G-TXE – TekExpress 400G TX electrical compliance solution (OIF-CEI-56G-VSR, MR, and LR). See datasheet »
- Opt. PAM4-O - Comprehensive PAM4 analysis and debug including ER, OMA, AOP, TDECQ, and more.
PAM4 software for the DSA8300:
Prepare for the new challenges in optical networking. During this webinar, experts will address critical design issues posed by integrating optical PAM4 capabilities into optical networking components or system utilizing the capabilities of a real time oscilloscope.
Until recently, both optical and electrical bandwidth produced similar results but this is no longer the case with the recent IEEE spec change. This paper clarifies these terms, mathematically shows how they are related, and provides the basis to understand and confidently calculate optical and electrical bandwidth for an optical channel.
|DPO70000SX Series Real Time Oscilloscopes||Realize the convenience and versatility of 70 GHz high performance real time systems with the exceptional debug and trigger capability to solve System level challenges and test needs for NRZ, PAM4 and Complex Modulation Analysis.|
|Serial Data Link Analysis (SDLA)||Offers advanced equalization and high-performance de-embedding necessary for accurate PAM4 characterization.|
|PAM4 Transmitter Analysis Software for DPO/DPS70000SX, MSO/DPO70000DX and MSO/DPO70000C Oscilloscopes||Provides automated electrical PAM4 measurements.|
|PAM4 Transmitter Analysis Software for DSA8300 Oscilloscopes||Provides automated electrical and optical PAM4 measurements.|
|DSA8300 Series Sampling Oscilloscopes||Accurate characterization of optical transmitter performance for major single-mode optical standards using industry leading built-in optical reference receivers with very low OSNR and highest bandwidth.|
|CR286A Clock recovery instruments||Supports most 400Gbp/s standards and works in concert with the Tektronix Sampling Scopes and BERTs to deliver a stable clock for accurate timing measurement analysis.|
|PatternPro PPG Series Pattern Generators and PED Series Error Detectors||For multi-lane generation (MLG), Tektronix PatternPro PPG's and PED's provide PAM4 signal generation and BER analysis in 400G PAM4 and NRZ test applications.|
Please enter a valid email address.
Your email has been sent.