Frage:
I would like to design our connectorless compression (P6860+ P6880+ P6864+ P6419) probe footprints to reduce the circuit board area by half? Can the probes be modified to do this?
Antwort:
| Yes, Nexus makes a compression probe head adapter (NEX-2X-PROBE) that allows probes to be placed on opposite sides of the board back-to-back. This reduces the circuit board area needed by half. The holes needed for a 17 channel probe can be used for two 17 channel probes, doubling the number of channels per hole. Please visit Nexus for details. |
FAQ-ID 55826
Alle FAQs ansehen »