Series 2380

Series 2380 programmable DC electronic loads can sink a wide range of voltages and currents. The 200 W Model 2380-500-15 can accept up to 500 V or 15 A. The 250 W Model 2380-120-60 can accept up to 120 V or 60 A. The 750 W Model 2380-500-30 can accept up to 500 V or 30 A. These single-output, stand-alone electronic loads are cost-effective and self-contained.

Key Features

200 W, 250 W, and 750 W models
Supports up to 500 V or 60 A
LED simulated load test mode
Readback voltage and current resolution down to 0.1 mV/0.01 mA
Dynamic mode with cycle rate up to 25 kHz
Voltage rise and fall time measurement
Current monitor function
List mode
Battery test mode
Built-in GPIB, USB, and RS-232 interfaces

Multiple Operating Modes

These DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), or constant power (CP) mode. They can also be configured to provide a dynamically changing load to the DC source with load switching times as fast as 25 kHz. Versatile internal, external, and remote triggering options allow synchronizing the dynamic load behavior with other events.

Comprehensive Protection

Protection functions built into Series 2380 DC electronic loads ensure the reliability and safety of all tests. These functions include overtemperature protection (OTP), overvoltage protection (OVP), overcurrent protection (OCP), overpower protection (OPP), and local/remote reverse voltage (LRV/RRV) protection. A power-on system self-test ensures the instrument is operating properly.

Full Complement of Settings and Controls

To maximize testing efficiency, you can save test parameters into any one of 100 memory locations for quick recall. All load parameters, such as voltage, current, slew rate, and dynamic mode time intervals, can be set using the front panel controls or programmed remotely. A numeric keypad and rotary knob allow entering settings quickly and setting parameters to their full resolution easily. USB-TMC, GPIB and RS-232 interfaces are built in for remote control and communications. A current monitor interface simplifies monitoring input current waveforms by providing a connection for an oscilloscope.

2380-500-15	Programmable DC Electronic Load, 500 V, 15 A, 200 W
2380-120-60	Programmable DC Electronic Load, 120 V, 60 A, 250 W
2380-500-30	Programmable DC Electronic Load, 500 V, 30 A, 750 W

Supplied Accessories

	Quick Start Guide
	Power cord

Available Accessories

2380-001	9-pin Rear Panel Mating Connector
2380-002	DUT Connection Protective Cover
7007-1	Double-Shielded Premium IEEE-488 Interface Cable, 1 m (3.2 ft)
KP-CL-488LPA	IEEE-488.2 Interface Board for the PCI Bus
USB-B-1	USB Cable, Type A Connector to Type B Connector, 1 m (3.3 ft)

Rackmount Kits for the 2380-500-15 and the 2380-120-60

4299-7	Universal Fixed Rackmount Kit
RMU2U	Fixed Rackmount Kit
386759800	RMU2U Rackmount Cosmetic Filler Panel

Rackmount Kit for the 2380-500-30

2380-RM

Full-Rack-Width Instrument Fixed Rackmount Kit

Services Available

Model Number*-1-EW	3-year factory warranty from date of shipment extended 1 additional year
Model Number*-5Y-EW	3-year factory warranty from date of shipment extended to 5 years
C/Model Number*-3Y-STD	KeithleyCare 3 YR STD Calibration Plan
C/Model Number*-3Y-DAT	KeithleyCare 3 YR Calibration w/Data Plan
C/Model Number*-5Y-STD	KeithleyCare 5 YR STD Calibration Plan
C/Model Number*-5Y-DAT	KeithleyCare 5 YR Calibration w/Data Plan

* Replace the specific power supply model number in place of Model Number to generate the appropriate model number for a service item. Example for a 2380-500-15, a 1-year extended warranty model number would be 2380-500-15-1-EW.

My Cart

Your Cart Is Empty