Digital Sampling Oscilloscope

Characteristics

Vertical Systems

Rise Time/Bandwidth - Determined by the sampling head used*¹

Vertical Resolution - 8-bit full screen (78 µV LSB at 2 mV/div deflection factor)

Amplifier Gain Accuracy - ±1% of all settings

Deflection Factors - 2 to 255 mV/div in 1 mV/div increments

Offset Range - ±2 V

Horizontal System

Main and Window Time Base - 1 ps/div to 5 ms/div, settable in 1-2-5 sequence or in 1-ps increments.

Time Interval Accuracy -

8 ps + 0.01% × (interval) + 0.001% × (position), guaranteed.

4 ps + 0.004% × (interval) + 0.0004% × (position), typical, where interval ≥1 ns.

2.5 ps + 0.0004% × (position), typical, where interval = 100 ps.

1 ps + 0.0004% × (position), typical, where intervals <10 ps.

Notes:

1) For intervals <100 ps, the above holds for time/div ≤20 ps/div.

2) For other intervals not listed above, linearity interpolate the cardinal points.

Record Length - 512, 1024, 2048, 4096, and 5120 samples.

Windows - Any number of window records may be placed on any number of main records, up to a maximum of 8 displayed traces. All window records have the same duration, but may be independently positioned on any main record. Windows may be set to automatically track a moving edge on the main record.

Maximum Sampling Rate - 200 ks/s.

Trigger System*²

Trigger Bandwidth - Direct 4 GHz typical, Prescaled 12.5 GHz typical

Trigger Sensitivity -

Direct DC to 4 GHz: 50 mV typical

Prescaled 2 to 10 GHz: 500 mV

10 to 12.5 GHz: 800 mV typical

Delay Jitter -

1.1 ps + 4 ppm of a position typical

2.0 ps + 5 ppm of position maximum (RMS)

Metastability -

Raw <0.005 ppm at 2.488 GHz with 200-mV input trigger voltage, typical

Enhanced is theoretically zero

Internal Clock - 100 kHz (drives TDR, Internal Clock Output, and Calibrator)

Trigger Level Range - ±1.0 V (±10 V with 10X trigger attenuator activated)

Trigger Input Range - ±1.5 V (±1.5 V, 5 V_RMS maximum with 10X)

Trigger Holdoff - 5 µs to 2.5 s

Measurement System

Waveform Processing Functions - Add, subtract, multiply, divide, absolute, average, differentiate, envelope, exponent, integrate, natural log, log, signum, square root, smoothing, and filter.

Measurement Set - Max, min, mid, pk-pk, mean, RMS, amplitude, extinction ratio, overshoot, undershoot, noise*³, rise, fall, spectral magnitude, spectral frequency, THD, SNR, frequency, period, prop delay, cross, width, phase, duty cycle, jitter*³, area+, area-, and energy. Measurements are constantly updated; mean and standard deviation available on all measurements.

Measurement Parameters - (Proximal, mesial, distal, and start/stop levels): May be set to absolute levels.

Cursors - Paired or split dots, vertical bars, and horizontal bars.

TDR System (SD-24 Only)

Combined TDR/Acquisition Reflected Rise Time - 35 ps or less

TDR Step Amplitude - Adjustable to ±250 mV (polarity of either step may be inverted)

Time-Coincidence Between TDR Steps - Adjustable to less than 1 ps

Source Resistance - 50 ±0.5 ohm

Typical Aberrations (at ±250 mV Amplitude) -

10 ns to 20 ps before step: ±3% or less

Less than 300 ps after step: +10%, -5% or less

300 ps to 5 ns after step: ±3% or less; elsewhere: ±1% or less

CRT and Display Features

CRT - 9 in. diagonal, magnetic deflection, vertical raster scan orientation. Color.

Colors - Eight-color default color set included; or, colors are user-selectable from palette of 262, 144 colors.

Video Resolution - 552 horizontal by 704 vertical displayed pixels.

*¹ Vertical system specifications of 11801C with SD-14 nonapplicable. See 11800 Series Sampling Head specifications.

*² 11801C has external trigger only; requires 23 ns pretrigger or DL-11 Delay Lines to view trigger point (45.5 ns with Option 1M).

*³ Available only in statistical measurement mode.

Power Requirements

Line-Voltage Ranges - 90 to 132 V_RMS, 180 to 250 V_RMS

Line Frequency - 48 to 440 Hz

Maximum Power Consumption - 214 W

Environmental and Safety

Temperature -

Operating: 0 °C to +50 °C

Nonoperating: -40 °C to +75 °C

Humidity -

Operating and nonoperating: up to 95% relative humidity, up to 50 °C. Per Mil-T-28800E, Type III, Class 5

Altitude, Vibration, Shock Nonoperating, Bench Handling - Meets MIL-T-28800E, Type III, Class 5

Electromagnetic Compatibility (with sampling heads or optional blank panels installed in all sampling-head compartments) - Meets the requirements of: MIL-STD-461B; FCC Part 15, sub-part J, Class A; VDE 0871/6.78 Class B

Safety - Listed UL 1244, CSA Bulletin 556B September 1973

Physical Characteristics