연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

제품 지원 및 다운로드

텍트로닉스 제품 지원 센터

'텍크놀로지(Tek-nology)'를 개발하는 일은 행복하지만, 동시에 매우 바쁘다는 걸 알고 있습니다. 이에. 텍트로닉스는 현재 출시되는 모든 제품과 단종된 여러 제품에 대한 설명서와 데이터 시트, 소프트웨어를 쉽게 다운로드할 수 있도록 제품 지원 센터를 만들었습니다. 사용 중인 제품명을 입력해 주시기만 하면 텍스로닉스가 보유하고 있는 모든 정보를 알려 드리겠습니다.

선택한 제품 모델은 현재 구입할 수 있으며, 다음 지원 정보도 제공됩니다.

  • 데이터 시트 참고자료 번호: 릴리즈 날짜
    400G Optical Manufacturing Analysis Software
    The DSA8300 400G-M4 is a PC based application for PAM4 optical signal validation. The 400G-M4 application supports four channel simultaneous acquisition and integrated receiver equalization with support for both auto optimization and user defined …
    61W-61365-2
    NRZ-M4 Optical Manufacturing TDEC Analysis Software
    The Tektronix NRZ-M4 application provides NRZ signaling analysis, including TDEC (Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use application. This application …
    85W-61522-0
  • Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design …
    기간: 4m 37s
    See how to conduct PAM-4 Analysis using PPG3204 Pattern Generator and DSA8300 Sampling Oscilloscope on multi-level eye diagrams.
    기간: 2m 6s
    At this booth, we're demonstrating our DS8300 Digital Sampling Oscilloscope including new PAM4 software modules. 
    기간: 2m 10s
    View this demonstration of interoperability at OFC2013 using Tektronix DSA8300 Sampling Oscilloscope and BSA286C BERTScope. Tektronix assisted the Optical Internetworking Forum (OIF) and member …
    기간: 4m 56s
    During ECOC 2014, Tektronix demonstrated 56 Gb/s Eye Diagram analysis on a DSA8300 Sampling Oscillocope.
    기간: 2m 10s
    With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …
    기간: 18m 33s
    Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design …
    기간: 2m 16s
    This webinar reviews TDR basics and the ability to create S-parameters using TDR/TDT measurements to validate high speed channels for debug or de-embedding in a Serial Data Link Analysis …
    기간: 21m 50s
    Designing and developing 100G components, modules and systems requires the latest tools and techniques. In this video, you'll learn how to:Set up a complete system for active optical cable …
    기간: 2m 7s
    Learn how more margin and higher yields are made possible with lowest optical noise, highest sensitivity solution available today. See comprehensive characterization – TDECQ accuracy and …
    기간: 1m 33s
    At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …
    기간: 3m 27s