아날로그/디지털 설계 및 디버깅

Why a Signal Generator is Essential for Accurate Measurements An acquisition instrument — usually an oscilloscope or logic analyzer — is probably the first thing that comes to mind when you think …

Troubleshooting embedded systems with multiple processors, sensors, actuators, communications and human interfaces, often demands more than the 2 or 4 measurement channels available on most …

THIS APPLICATION NOTE Explains how to measure turn-on and turn-off delays when the power supply is controlled by connecting and disconnecting the AC mains input Explains how to make turn-on …

High performance mixed analog and digital systems continue to evolve with increasing performance and complexity. Designers need to quickly find and analyze a wide range of problems from signal …

Introduction Clocks are the heartbeats of embedded systems, providing timing references and synchronization between components, subsystems,and entire systems. Incorrect clock …

This application note gives a procedure for performing quick checks on an Analog to Digital Converter (ADC) system gain, offset and linearity.  The technique uses a ramp signal from a function …

The ability to present both analog and digital representations of signals make mixed signal oscilloscopes (MSOs) ideal for verifying and debugging digital circuits. This application …

THIS APPLICATION NOTE Gives a brief orientation on the physical layer and packet structures of CAN / CAN FD, LIN, and FlexRay buses, with a goal of providing just enough detail to help with …

THIS APPLICATION NOTE Gives a brief orientation on the physical layer and packet structures of I2C and SPI, with a goal of providing just enough detail to help with …

This Application Note: •     Gives a brief orientation on the physical layer and packet structure of Ethernet, with a goal of providing just enough detail to help with …

THIS APPLICATION NOTE Gives a brief orientation of simple timing analysis measurements on clock signals Explains how to interpret timing and jitter measurements Gives …

Learn the basics of the USB 2.0 physical layer to help you troubleshoot bus problems or system issues.  Learn how to set up and interpret the results when using automated decoding, triggering, and …

일반적인 임베디드 시스템은 켜지자마자 특수 목적을 지닌 애플리케이션을 실행하며 시작 하고 꺼질 때까지는 작동이 멈추지 않습니다. 사실상, 오늘날 설계되고 생산되는 모든 전자 장치는 임베디드 시스 템입니다. 임베디드 시스템의 예로는 다음과 같은 것이 있습니다.

THIS APPLICATION NOTE Explains the basic setup of a mixed signal oscilloscope (MSO) Tells how to interpret the logic signal display on a Tektronix MSO Explains …

Learn about remote analysis.  We cover how TekScope, TekDrive, and eScope unlock scope capabilities through synchronous control, offline analysis, and cloud storage.