질문:
Is anything additional needed to communicate with the TG2000 by GPIB?
답변:
In order to communicate to the TG2000 with GPIB, the GP1 module must be installed in the TG2000. In addition, a National Instruments GPIB card and driver for the PC is required. Please contact National Instruments to acquire a GPIB card for your PC. LABVIEW drivers are not available for the TG2000.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 60886
모든 FAQ 보기 »