Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

TMT4 Margin Tester Declassification and Security Instructions

TMT4 Margin Tester

This document helps customers with data security concerns to sanitize or remove memory devices from the TMT4 Margin Tester.


Ce manuel s’applique à:

TMT4

  • Type de manuel: Déclassification
  • Référence: 077173400
  • Date de publication:
By downloading, you agree to the terms and conditions of the Manuals Download Agreement

Manuals Download Agreement

ATTENTION: please read the following terms and conditions carefully before downloading any documents from this website. By downloading manuals from Tektronix' website, you agree to the following terms and conditions:

Manuals for Products That Are Currently Supported:

Tektronix hereby grants permission and license to owners of Tektronix instruments to download and reproduce the manuals on this website for their own internal or personal use. Manuals for currently supported products may not be reproduced for distribution to others unless specifically authorized in writing by Tektronix, Inc.

A Tektronix manual may have been revised to reflect changes made to the product during its manufacturing life. Thus, different versions of a manual may exist for any given product. Care should be taken to ensure that one obtains the proper manual version for a specific product serial number.

Manuals for Products That Are No Longer Supported:

Tektronix cannot provide manuals for measurement products that are no longer eligible for long term support. Tektronix hereby grants permission and license for others to reproduce and distribute copies of any Tektronix measurement product manual, including user manuals, operator's manuals, service manuals, and the like, that (a) have a Tektronix Part Number and (b) are for a measurement product that is no longer supported by Tektronix.

A Tektronix manual may be revised to reflect changes made to the product during its manufacturing life. Thus, different versions of a manual may exist for any given product. Care should be taken to ensure that one obtains the proper manual version for a specific product serial number.

This permission and license does not apply to any manual or other publication that is still available from Tektronix, or to any manual or other publication for a video production product or a color printer product.

Disclaimer:

Tektronix does not warrant the accuracy or completeness of the information, text, graphics, schematics, parts lists, or other material contained within any measurement product manual or other publication that is not supplied by Tektronix or that is produced or distributed in accordance with the permission and license set forth above.

Tektronix may make changes to the content of this website or to its products at any time without notice.

Limitation of Liability:

TEKTRONIX SHALL NOT BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR FOR INFRINGEMENT OF INTELLECTUAL PROPERTY) ARISING OUT OF THE USE OF ANY MEASUREMENT PRODUCT MANUAL OR OTHER PUBLICATION PRODUCED OR DISTRIBUTED IN ACCORDANCE WITH THE PERMISSION AND LICENSE SET FORTH ABOVE.

Read Online

Preface

This document helps customers with data security concerns to sanitize or remove memory devices from their Tektronix instrument.

These products have data storage (memory) devices and data export interfaces (USB port, Ethernet, and SD card). These instructions describe how to clear or sanitize the memory devices and disable the data output interfaces. The instructions also describe how to declassify an instrument that is not functioning.

Products

This document pertains to the TMT4 Margin Tester.

Terms

The following terms may be used in this document:

  • Clear. This eradicates data on media/memory before reusing it in a secured area. All reusable memory is cleared to deny access to previously stored information by standard means of access.

  • Erase. This is equivalent to clear.

  • Media. Storage/data export device. A device that is used to store or export data from the instrument, such as a USB port/USB flash drive.

  • Sanitize. This removes the data from media/memory so that the data cannot be recovered using any known technology. This is typically used when the device will be moved (temporarily or permanently) from a secured area to a nonsecured area.

  • Scrub. This is equivalent to sanitize.

  • Remove. This is a physical means to clear the data by removing the memory device from the instrument. Instructions are available in the product service manual.

  • User Accessible. User is able to directly retrieve the memory device contents.

  • User-Modifiable. The memory device can be written to by the user during normal instrument operation, using the instrument user interface or remote control.

  • Volatile memory. Data is lost when the instrument is powered off.

  • Non-user-accessible memory. Data is retained when the instrument is powered off.

  • Power off. Some instruments have a “Standby” mode, in which power is still supplied to the instrument. For the purpose of clearing data, putting the instrument in Standby mode does not qualify as powering off. For these products, you must remove the power source from the instrument.

  • Instrument Declassification. A term that refers to procedures that must be undertaken before an instrument can be removed from a secure environment. Declassification procedures include memory sanitization and memory removal, and sometimes both.

Clear and sanitize procedure

Memory device table terminology

The following terms are used in the tables in this section:

  • User data. Describes the type of information stored in the device. Refers to waveforms or other measurement data representing signals connected to the instrument by users.

  • User settings. Describes the type of information stored in the device. Refers to instrument settings that can be changed by the user.

  • Both. Describes the type of information stored in the device. It means that both user data and user settings are stored in the device.

  • None. Describes the type of information stored in the device. It means that neither user data or user settings are stored in the device.

  • Directly. Describes how data is modified. It means that the user can modify the data.

  • Indirectly. Describes how data is modified. It means that the instrument system resources modify the data and that the user cannot modify the data.

Memory devices

The following tables list the memory devices in the instrument.

Table 1. Volatile memory
Type & min. size Function Type of user info stored Backed up by battery Method of modification Data Input method Location User accessClear Sanitize
SDRAM

4 GB

Holds active system memory Both No Directly Written by processor system FPGA board Yes Remove power from the instrument for a minimum of 20 seconds.
Table 2. Non-volatile memory
Type & min. size Function Type of user info stored Method of modification Data Input method Location User accessClear Sanitize
QSPI Flash 1 GBit Configuration data, settings and SDM firmware and HPS EMIF None None Factory configuration, firmware update operationsFPGA board No Not applicable, does not contain user data or settings. Clearing or sanitizing would disable instrument functionality.
EEPROM

2 Kbit

MAC ID None None Factory configuration FPGA board No Not applicable, does not contain user data or settings. Clearing or sanitizing would disable instrument functionality.
SD card

64 GB

User data, rest of U-Boot, Linux,and the application User data (database, logs) Indirect / Direct Firmware operations, user inputSD card in rear power board Yes Remove the SD card. Store the removed hard drive in a secure area or destroy it.

Media and data export devices

The following table lists the data export devices in the instrument.

Table 1. Media and Data export devices
TypeFunctionMethod of modificationData input method LocationUser accessDisable
USB host port

(supports removable USB flash drive)

User storageDirectlyUser writeable USB port on front of instrument.

Files can be deleted or over-written, or USB flash drive can be removed and destroyed.

YesThe USB host port cannot be disabled.
SD cardUser data, rest of U-Boot, Linux,and the application Indirect / DirectFirmware operations, user inputSD card from rear panelYes Remove SD card. This will also disable functionality of the instrument.
LAN Ethernet connectorTransfer dataDirectlyN/ARear panelYesN/A

To sanitize SD card memory

Sanitizing means that all data in reusable memory is changed or overwritten such that the original data is no longer in memory, and the older data cannot be recovered using any known technology. You typically do a sanitize operation when you move an instrument (temporarily or permanently) from a secured area to a nonsecured area.

  1. Power off the instrument.
  2. Use a T10 screwdriver to remove the SD card door from the rear of the instrument.
  3. Remove the SD card from the SD slot.
  4. Refer to the internal policies of your organization regarding handling or disposal of the SD card.

To restore SD card memory

To recover from a nonvolatile memory sanitization, replace stored SD card into instrument or request a new program flashed SD card from Tektronix. The sanitized SD card is not usable. Contact Tektronix for further instructions.

Troubleshooting

How to sanitize a non-functional instrument

If your instrument is not functioning, proceed as follows to sanitize the instrument before returning it to Tektronix for repair.

Remove SD card

  1. Power off the instrument.
  2. Use a T10 screwdriver to remove the SD card door from the rear of the instrument.
  3. Remove the SD card from the SD slot.
  4. Refer to the internal policies of your organization regarding handling or disposal of the SD card.

Repair charges

Replacement of any missing hardware will be charged according to the rate at the time of replacement.

Help us improve our technical documentation. Provide feedback on our TekTalk documentation forum.