Вопрос :
What are some of the required tests for the SATA standard?
Ответ :
For SATA revision 1 the following are some of Pass/Fail tests required in the standard:
Amplitude Differential Voltage
AC Common Mode Voltage
Timing Rise Time
Fall Time
Differential Skew
Jitter Total Jitter
Deterministic Jitter
Random Jitter
SSC Analysis
Out Of Band COMINIT
COMWAKE
COMRESET
Note the eye diagram is not required for compliance but is recommended for fault location and as informational.
Эти часто задаваемые вопросы относятся к
Серия приборов не найдена
Прибор:
Идентификатор часто задаваемых вопросов 53096
Просмотреть все ЧЗВ »