질문:
Where is the "Invert" button on my DPO2000 or the MSO2000?
답변:
If you have older firmware version v1.06 or below, you will need to use the Math function on the oscilloscope to subtract the channel of interest from another channel that is set to ground coupling in order to get the invert function.
The invert function has been added for firmware v1.25 or above.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 60221
모든 FAQ 보기 »