연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

My KUSB-3100 Series module was not detected on restart nor is the module detected when Windows is restarted or resumed from hibernation. What can I do to resolve this issue?

질문:

My KUSB-3100 Series module was not detected on restart nor is the module detected when Windows is restarted or resumed from hibernation. What can I do to resolve this issue?

답변:

Product(s):

USB Modules: KUSB-3100 Series: KUSB-3100, KUSB-3102, KUSB-3108, KUSB-3116, KUSB-3160


Question:My KUSB-3100 Series module was not detected on restart nor is the module detected when Windows is restarted or resumed from hibernation. What can I do to resolve this issue?


Answer:You may experience one or more of the following symptoms on your Microsoft Windows XP Service Pack 1 (SP1) or Microsoft Windows 2000 Service Pack 3 (SP3)-based computer:Universal Serial Bus (USB) devices are not detected when you restart the computer. USB devices are not detected after you resume the computer from hibernation or standby. The computer uses 100 percent of the CPU time when you move the USB mouse. The computer stops responding (hangs) when you resume the computer from standby when a USB mouse is connected. The computer takes a long time to start or resume when a USB device is connected. A yellow exclamation point with a Code 28 or Code 31 is displayed on a USB device in Device Manager. USB 2.0 High-Speed devices are detected as Full-Speed (USB 1.1) devices when your computer resumes from hibernation even though they are plugged in to a USB 2.0-capable port. See: http://support.microsoft.com/default.aspx?kbid=810090for the solution to these issues.

 


 Copyright 2003, Keithley Instruments, Inc.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 71581

모든 FAQ 보기 »