CSA8000+ TDS8000+ CSA8000B+ TDS8000B+ CSA8200+ TDS8200+ DSA8200+ 80SICON+ 80SSPAR+ 80SICMX: What are some good measurement practices for best measurement results?

질문:

답변:

The following are some suggestions to optimize measurement results:

Let the instrument warm up for at least
20-30 minutes before performing the measurements
Perform the required calibrations
Use good quality low loss cables and probes
Use a lot of averaging to reduce noise
Use a maximum number of acquisition points
De-skew the channels in the TDR -oscilloscope, as specified by your oscilloscope manual.

이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 55351

모든 FAQ 보기 »