Kontaktaufnahme

Live-Chat mit Tektronix-Vertretern. Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Anrufen

Kontaktieren Sie uns telefonisch unter

Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

DOWNLOADTYP
MODELL ODER SCHLÜSSELWORT

Feedback

Produktsupport und Downloads

Willkommen beim Tektronix-Produktsupport

Wir freuen uns, den ganzen Tag mit Ihnen über Technik zu sprechen, aber wir wissen, dass Sie es eilig haben. Daher haben wir es Ihnen leicht gemacht, Handbücher, Datenblätter und Software für alle unsere aktuellen Produkte und viele nicht mehr verfügbare Produkte herunterzuladen. Sagen Sie uns einfach, welches Produkt Sie verwenden, und wir zeigen Ihnen alles, was wir haben.

Das ausgewählte Produkt ist ein veraltetes, eingestelltes Produkt. Die folgenden Supportinformationen stehen zur Verfügung.

  • Handbücher Handbuchtyp Teilenummer Veröffentlichungsdatum
    Tektronix BERTScope

    Clock Recovery Declassification & Securities Instructions

    Geheimhaltungsaufhebung 077110200
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmierer 077069605
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmierer 077069604
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmierer 077069603
    Tektronix BERTScope

    Clock Recovery Instruments Quick Start User Manual

    Hauptbenutzer 071285202
    Tektronix BERTScope

    BSAPCI3 Instructions

    Benutzer 071304600
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmierer 077069602
    Tektronix BERTScope

    Clock Recovery Instruments Quick Start User Manual.

    Hauptbenutzer 071285201
    Tektronix BERTScope

    BSA & BA Remote Control Guide Programmer Manual

    Programmierer 077069601
    BERTScope Clock Recovery Quick Start Guide

    This Quick Start User Manual supports the Tektronix BERTScope CR125A, CR175A, and CR286A Clock Recovery instruments. Quick Start User Manual

    Benutzer 077055700
    BERTScope

    Clock Recovery Instruments Quick Start User Manual

    Benutzer 071285200
  • Technische Dokumente Dokumenttyp Veröffentlichungsdatum
    BERTScope® Bit Error Rate Testers Jitter Map “Under the Hood”
    Delve into jitter problems in new ways, such as examining Random Jitter on each edge of the data pattern, separating out the jitter caused by transmitter pre-emphasis, and performing jitter decomposition on long patterns such as PRBS-31.  
    Anwendungshinweis
    Stress Calibration for Jitter >1UI
    While measuring the amount of jitter present on a signal is relatively straight forward conceptually; when the levels of jitter are small, amounts above a bit period (1 unit interval or UI) can be more difficult. This has practical consequences for …
    Anwendungshinweis
    Six Sigma’ Mask Testing with a BERTScope® Bit Error Rate Tester
    Six sigma is a form of mask testing that provides for critical insight when mask testing depth specification are important for pass/fail testing or deeper evaluation on high-speed signaling standards to provide a significantly more complete picture …
    Anwendungshinweis
    Bridging the Gap Between BER and Eye Diagrams — A BER Contour Tutorial
    BER Contour Measurement - What it is, how it is constructed, and why it is a valuable way of viewing parametric performance at gigabit speeds.
    Anwendungshinweis
    Clock Recovery’s Impact on Test and Measurement
    As clock recovery becomes increasingly common in more systems and test setups, its effects on measurements must be considered. Many outside influences can disturb the relationship between data and how it is clocked. By understanding the relationship …
    Anwendungshinweis
    Comparing Jitter Using a BERTScope® Bit Error Rate Testing
    Comparison of DCD and F/2 Jitter.
    Anwendungshinweis
    Anatomy of an Eye Diagram
    This application note discusses different ways that information from an eye diagram can be sliced to gain more insight. It also discusses some basic ways that transmitters, channels, and receivers are tested.
    Anwendungshinweis
    BERTScope Content Archive
    To request copies of historical content from SyntheSys Research (now Tektronix Inc.) related to BERTScope and the following applications, please click the link below.Request Now
    Technisches Informationsblatt
    Stressed Eye Primer
    In addition to an introduction to stressed eye testing, this primer discusses some of the high-speed standards that use it, and how a receiver test using stressed eye is constructed.
    Einführungshandbuch
    Characterizing an SFP+ Transceiver at the 16G Fibre Channel Rate
    Study the measurements needed to test an SFP+ transceiver to the 16G Fibre Channel standard, covering both Multi- Mode 850 nm and Single Mode 1310 nm interfaces. Included is a test and characterization example using a Single Mode 1310 nm laser SFP+ …
    Einführungshandbuch
    BERTScope™ CR125A+ 175A+ & 286A Clock Recovery Fact Sheet
    Key Specs and Ordering Information for BERTScope CR125A, 175A, & 286A Clock Recovery.
    Datenblatt
    Evaluating Stress Components using BER-Based Jitter Measurements
    This primers describes how jitter measurements can be self-verified using a BER-based Jitter Peak measurement and how to simplify the jitter measurement challenge by using a pattern that does not contribute pattern-dependent effects, and finally …
    Einführungshandbuch
    PCI Express® Transmitter PLL Testing — A Comparison of Methods
    There are several methods of measuring PLL loop response, based on the type of test instrumentation used. As expected, the various methods trade off test accuracy, test speed (throughput), ease of use, ease of setup, and initial cost. In addition …
    Einführungshandbuch
    Clock Recovery Primer, Part 1
    Part 1 of looking at clock recovery from a practical point of view with emphasis on how it affects measurements.
    Einführungshandbuch
    Clock Recovery Primer, Part 2
    Part 2 of looking at clock recovery from a practical point of view with emphasis on how it affects measurements.
    Einführungshandbuch
    Stressed Eye: “Know What You’re Really Testing With”
    BER-based measurements can provide a better view of the stress eye opening down at the deep BER levels that the receiver will be expected to operate at when it is tested.
    Einführungshandbuch
    Dual-Dirac+ Scope Histograms and BERTScan Measurements
    This primer discusses how the dual-Dirac relates to practical measurements that can be made with sampling scopes and BER-based instruments.
    Einführungshandbuch
  • Software Dokumenttyp Teilenummer Veröffentlichungsdatum
    BERTSCOPE PC APPLICATION SOFTWARE - V12.04.5608
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to a …
    Anwendungsgebiet 063430807
    BERTSCOPE PC APPLICATION SOFTWARE - V12.04.5522
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to a …
    Anwendungsgebiet 063430806
    BERTScopePC Software, V 10.15.1284
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125, DPP125B, DPP125C)and BSAITS instruments that are being operated as stand-alone instruments, i.e. not …
    Anwendungsgebiet 063430803
    BERTScopeCR Help File V1.0
    BERTScope Clock Recovery Instrument Help File for offline use.
    Anwendungsgebiet 066130900
    BERTScopePC Software V 10.9.1024
    The BERTScope PC software provides for PC control of BERTScope Clock Recovery (CR125A, CR175A, CR286A) and Digital Pre-Emphasis Processor (DPP125, DPP125B) instruments that are being operated as stand-alone instruments, i.e. not connected directly to …
    Anwendungsgebiet 1000000482
  • This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …
    Dauer: 4m 35s
    The physical setup for USB 3.1 receiver calibration and testing is shown in this video.
    Dauer: 4m 33s
    Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.
    Dauer: 1m 16s
    The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …
    Dauer: 3m 34s