How do I make SNR measurements on a VM700/A/T?

Q: How do I make SNR measurements on a VM700/A/T?

To get SNR measurements from a VM700/A/T , press the “MEASURE” button to bring up the measurements menu. From this menu, select the “Noise Spectrum” option. This will bring up a display of the noise spectrum, near the top of this display you will find the overall SNR value listed. You can also use the general purpose knob to select a specific frequency at which you would like to measure the noise.

Вопрос :

Ответ :

To get SNR measurements from a VM700/A/T, press the “MEASURE” button to bring up the measurements menu. From this menu, select the “Noise Spectrum” option. This will bring up a display of the noise spectrum, near the top of this display you will find the overall SNR value listed. You can also use the general purpose knob to select a specific frequency at which you would like to measure the noise.

Эти часто задаваемые вопросы относятся к

Серия приборов не найдена

Прибор:

Идентификатор часто задаваемых вопросов 56571

Просмотреть все ЧЗВ »