Häufig gestellte Fragen

FAQ	FAQ-ID Aufsteigend sortieren
What causes embedded audio to click or pop? The most common cause of embedded audio clicks or pops come from the audio not being properly locked to the video. Check to make sure that your audio embedding device has a valid audio sync or DARS (digital audio reference signal) being fed to it, and that … Diese FAQs beziehen sich auf:	62161
What bandwidth of the oscilloscope is adequate for testing a 1000BaseT signal? Most of the energy of the Test Mode signals for 1000BaseT lies in the range of 1MHz to 100MHz. An oscilloscope with bandwidth of 1GHz or more is recommended as it would result in less errors in measurement and hence in more reliable testing. For 1000BaseT … Diese FAQs beziehen sich auf:	62156
What are the requirements and ideal step to run RFXpress software? Requirements:.NET v2.0 runtime framework should be installed.TekVisa v3.0 is installedAWG V1.1 or above is installed (software in external PC offline version can be installed)Steps:Run AWG software and make sure application is loaded.Run RFXpress software. Diese FAQs beziehen sich auf:	62151
What are the physical dimensions+ weight and power consumption of the WVR6100/7000 series products? Physical Characteristics for the WVR6000/7000 series:Dimensionsmmin.Height44.451.75Width482.619Depth (front to back including handles and BNCs)514.3520.25Weightkglbs.Net3.978.75Power:100 to 240 VAC -10% 75W Diese FAQs beziehen sich auf:	62146
What are the minimum PC system requirements for installing MTS3SWO stand-alone software applications? Minimum System Requirements for installing any of the MTS3SWO software options are: Windows NT 4.0, Service Pack 5, 150 MHz Processor, 32 MB Memory, CD-ROM Drive 8x, 140 MB Free Space on the Hard Drive, 1024x768, 256 Color Video Display, keyboard, and … Diese FAQs beziehen sich auf:	62141
What are the common issues with TDR? The trigger source is not coerced to Internal Clock when TDR Step generators are manually turned on (see the TDR setup menu).Tektronix recommends using TDR Preset when setting up TDR. TDR Preset not only sets the trigger source to Internal Clock, it also … Diese FAQs beziehen sich auf:	62136
What are some GPIB-Programming tips? The CSA8000 and TDS8000 instruments use a pipelined architecture for data acquisition and control and query commands. As a result, care must be exercised to ensure that the results returned from data or measurement queries are what were expected. A number … Diese FAQs beziehen sich auf:	62131
We can ensure that our system is operating at 99% of the time without a loss of signal+ why do I need to monitor for Picture Quality? Signal Present / Not Present and Picture Quality monitoring are not one and the same. Although a signal is present it does not mean that the video quality has not been compromised due to compression, path losses, etc, all defects that are clearly visible … Diese FAQs beziehen sich auf:	62126
The TLA7PG2 is no longer available. Does Tektronix provide a pattern generator module that fits inside the TLA700 and TLA7000 series mainframes? Yes our partner, Moving Pixel at http://www.movingpixel.com/ builds a replacement that is 64 channels wide and is 300MHz across all channels. The nomenclature is PG3AMOD. PG3ACAB is the stand alone version. You can go to their products link and look for … Diese FAQs beziehen sich auf:	62121
The red ERROR LED is lit on my PG3AMOD/PG3ACAB+ should I be concerned? Not necessarily. The PG3A requires a physical link between the USB port and the controller as well as the GUI to work properly. Until the software communicates with the unit, this LED will continue to be lit. Diese FAQs beziehen sich auf:	62116