Вопрос :
What type of cable is required to connect to the Trig in/out and Signal in/out connections on my TLA711/TLA720/721 controller?
Ответ :
The connectors used on these mainframe controllers are SMB’s. A P6041 probe was included as a standard accessory. It is approximately 40” long and has a SMB connector on one end and a BNC connector on the other.
Эти часто задаваемые вопросы относятся к
Серия приборов не найдена
Прибор:
Идентификатор часто задаваемых вопросов 64266
Просмотреть все ЧЗВ »