與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

Tektronix PCIe 5.0 Base and CEM Receiver Test Automation Software

Tektronix PCIe 5.0 Base and CEM Receiver Test Automation Software is based upon the procedures described in the PCI-SIG Compliance Test Specification (CTS) document. Receiver testing involves calibrating the set-up and then proceeding with various tests as laid down in the specification. These tests are accomplished by connecting the BERT (which can produce specific PCIe test patterns) to the input of the DUT through a specialized set of fixtures and cables. The BERT can be programmed to add different amounts of random jitter, sinusoidal jitter, differential, and common mode interference along with variable signal amplitude, pre-shoot, and de-emphasis. Output of the DUT is connected to the BERT error detector to identify bit errors on the DUT Tx traffic, either during loopback or during sweep of one of the stress parameters

此軟體適用於: DPS75004SX, DPS75904SX, DPS77004SX

Following Software Download Policies and Agreement are applicable when you download Software from Tektronix website.

相關產品資訊