與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

意見回饋

On the DPO4000/MSO4000 scopes+ how do you get to cursors for amplitude?

問題:

On the DPO4000/MSO4000 scopes+ how do you get to cursors for amplitude?

答案:

The cursor operation is as follows:

Push the CURSOR button once to activate the two vertical cursors. Push again to turn on the two vertical and two horizontal cursors. Push again to turn off all cursors.

When the cursors are on, you can turn the multipurpose knobs to control their position.

SELECT button: Push to activate special functions. For example, when using the two vertical cursors (and no horizontal ones are visible), you can push this button to link or unlink the cursors. When the two vertical and two horizontal cursors are both visible, you can push this button to make either the vertical cursors or the horizontal ones active.


此常見問答集適用於:

沒有任何產品系列

產品:

常見問答集 ID 63921

檢視所有常見問答集 »