Current Language
×
Chinese (Traditional, Taiwan)

選取語言:

切換功能表
Current Language
×
Chinese (Traditional, Taiwan)

選取語言:

與我們聯絡

與 Tek 業務代表即時對談。 上班時間:上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間:上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等:

下載類型
機型或關鍵字

#2310 Configuring an Optimal RF/Microwave Switch System


Given the explosive growth of the communications industry, a tremendous amount of testing is being performed on the various components that make up different communications systems. These components range from active components such as Radio Frequency Integrated Circuits (RFICs) and Microwave Mono-lithic Integrated Circuits (MMICs) to space communication systems. While the testing requirements and procedures for these components differ widely, all are tested at very high frequencies, typically at gigahertz or higher. The main components in a typical test system may include DC bias, DC measurement, RF power meter, network analyzer, etc. Automating the test process and improving test efficiency demands integrating RF/microwave and low frequency switching systems into thetest system.