與我們聯絡

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

FastQuote

Already a Tektronix service client with CalWeb access? Log in to CalWeb to order service.

步驟 1 / 2： 將設備新增到報價
上傳設備清單

All instruments will be quoted for Standard Calibration (z540.1 no data) calibration unless otherwise specified in your list. Click to view Calibration Service Levels.

選擇檔案 或放在這裡
Make, Model, and Description must be present to receive an accurate quote.
- 或 -
新增個人設備

輸入製造商名稱。

輸入型號。

輸入商品說明 (可選)。

Please Note: Fast Quotes are valid in North America only. International requests will be routed to your regional office for processing. For new customers, a minimum order size may apply, so upload your entire asset list today to avoid delays in the quoting process. Click here to see North America Locations or email the Customer Care Center for help.

步驟 2 / 2： 輸入您的聯絡資訊

* = 必填

帳單地址 (只在不同於運送地址時)

Calibration Service Levels

If you know the type of calibration service you need, please enter it here. If you are unsure, our customer service representatives will help you identify the correct level of calibration to meet your requirements.

Standard Calibration (ANSI/NCSL Z540.1)

Services compliant with this standard provide a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Measurement parameters not meeting the test specifications (out of tolerance) are identified and reported on the certificate.

Standard Calibration (ANSI/NCSL Z540.1) with Data

Services compliant with this standard provide a calibration certificate with a calibration date and calibration due date. A traceability statement is provided. Complete before/after measurement data is provided, listing the test name, measured value and test limits for each parameter tested during the calibration process.

17025 Calibration Service

Instrumentation is calibrated in accordance with ISO/IEC 17025 within our approved scope of accreditation. Accredited calibrations provide a certificate of calibration with the accrediting body's logo on the document. The calibration date is on the certificate; calibration due date is only placed on the document when specified by the customer or contractually agreed. A traceability statement is provided. Measurement data and uncertainty for each parameter tested during the calibration is provided.

Certificate Options

 

Z540.1

Z540.1 w/ Data

Accredited 17025 With Uncertainties

ANSI/NCSL Z540.1 Compliant

X

X

X

ISO 9001:2008 Compliant

X

X

X

ISO/IEC 17025 Accredited Calibration

 

 

 

Traceable Calibration to National Standards

X

X

X

Out-of-Tolerance (OOT) Notification

X

X

X

As Found/As Left Test Data

OOT?

X

X

Online Electronic Certificate (DATA)

X

X

X

Online Electronic Certificate (DATA)

 

 

X
1 - For those parameters found OOT
Notes:

Calibration Intervals

If you know the calibration interval required for your instrument(s), please enter it here. If you are unsure, our customer service representatives will help you identify the calibration interval that meets your requirements.

Ideal spreadsheet template to receive an accurate quote

In order to provide you with an accurate quote please provide as much detail about the instruments as possible. The following is an ideal spreadsheet template to use for list submissions.
Manufacturer Model Number Description Serial Number ID Number Calibration Level