- Home
- Products
- Oscilloscopes
- Logic Analyzers
- Protocol Analyzers
- Bit Error Rate Testers
- Signal Generators
- Spectrum Analyzers
- Probes and Accessories
- Baseband Video Test Solutions
- MPEG Video Test Solutions
- Video Quality and Service Assurance
- Digital Multimeters
- DC Power Supplies
- Frequency Counters and Timers
- RF Power Meters
- Embedded Instrumentation
- Optical Modulation Analyzer
- Tektronix Communications
- Tektronix Components
- Applications
- Service
- Support
- Purchase
- About Us
- My Account
Differential Passive Voltage Probe Pair
P6135A
The following products have been replaced by newer models:
Product Models:
P6135A
Features & Benefits
P6135A
- Attenuation Adjustable to 10X
- 10,000: 1 CMRR on 11A33 Differential Comparator; 20,000: 1 on 7A13 Differential Amplifier
- ±500 V Maximum Common Mode Voltage
- Matched Pair
Applications
- Power Supplies
- Disk Drives
- Electronic Ballast
- Intelligent Motion
- Adjustable Speed Drives
P6135A Differential Probe Pair
The P6135A differential probe pair is very carefully matched to minimize differences in impedance and signal delay.
With differential amplifiers the P6135A provides CMRR ratios up to 20,000:1. Since a single 10X probe with accuracy of 1% or less gives a scope-to-probe CMRR of no better than 50:1, the P6135A is essential to obtain accurate results from your differential amplifier. Three pairs of carefully matched, precision-engineered hybrid tips enable the P6135A to be specifically matched with all Tektronix 11000, 7000 and 5000 Series differential amplifiers and comparators. It also provides excellent performance when used with plug-in amplifiers or oscilloscopes having input impedances of 1 MΩ/13-15 pF, 1 MΩ/18-22 pF and 1 MΩ/45-49 pF.
Characteristics
CMRR -
On 11A33: 10,000:1 from DC to 1 kHz, derating to 100:1 at 20 MHz.
On 7000 Series: 20,000:1 from DC to 1 kHz derating to 100:1 at 20 MHz.
Attenuation - Adjustable to 10X.
Input Resistance - 1 MΩ.
Input Capacitance - 10.5 pF on instrument with 15 pF input capacitance; 11.0 pF when used with instrument that has 20 pF input capacitance; 13.7 pF when used with instrument that has 47 pF input capacitance.
Maximum Useful Bandwidth -
On 11A33: DC to 150 MHz.
On 7A13: DC >90 MHz.
Typical Probe Rise Time -
On 11A33: <2.33 ns.
On 7A13: <3.89 ns.
Maximum Common Mode Voltage - 500 V (DC + pk AC) from DC to 1.3 MHz, derated to 50 V (DC + pk AC) at 100 MHz.
Safety - UL 1244.
|
P6135A not available in Europe.
|
|
Product(s) are manufactured in ISO registered facilities.
|
|
CE Marking Not Applicable.
|
60W-15112-0a
Last Modified: 2002-12-01 08:00:00
- Datasheet
- Product Support
