DPO7000 Digital Phosphor Oscilloscope Series
High-performance Analysis for Complex Digital Designs
The DPO7000 Digital Phosphor Oscilloscope provide the signal fidelity, triggering, protocol decode and search capabilities needed to debug, characterize and analyze 1st generation serial data, RF, memory and general purpose devices. With models ranging in bandwidth from 500 MHz to 3.5 GHz; the DPO7000 and its high waveform acquisition capability are ideal for complex signal characterization challenges.
Models in the DPO7000 Series:
| Model | Bandwidth | Sample Rate | Record Length | Channels | Starting Price* |
|---|---|---|---|---|---|
| DPO7354 | 3.5 GHz | 40/20/10 GS/s | 400/200/100 M | 4 | Check List Price |
| DPO7254 | 2.5 GHz | 40/20/10 GS/s | 400/200/100 M | 4 | Check List Price |
| DPO7104 | 1 GHz | 40/20/10 GS/s | 200/100/50 M | 4 | Check List Price |
| DPO7054 | 500 MHz | 20/10/5 GS/s | 200/100/50 M | 4 | Select Your Country |
- Overview
- Application Notes
- Probes & Accessories
- Software Packages
Features |
Benefits |
| A variety of bandwidth models from 500 MHz to 3.5 GHz | Accurate signal characterization of standards like 100 BaseT Ethernet at 500 MHz on up to DDR2 at 3.5 GHz. |
| High sample rate on all 4 channels simultaneously | Ensure accurate channel-to-channel evaluation and greater signal visibility for pinpointing timing anomalies with 10 GS/sec sample rate across all 4 channels. |
| Long record length on all 4 channels | Capture up to 400 mega points for accurate jitter measurement, meeting compliance requirements for standards like USB2.0. |
| FastAcq waveform capture | With >250,000 waveforms per second being displayed, quickly find intermittent events like a DDR2 Read or Write that can not be seen with a typical digital oscilloscope. |
| Pinpoint® triggering with low-speed serial trigger | Speed up debug of buses like RS-232, SPI and I2C through standards-specific trigger functions. |
| Serial compliance and analysis options | Simplify compliance verification and debugging of communications system designs such as Ethernet and USB. |
| Large 12.1" XGA resolution display | Greatly improve visual identification of measurement tasks. |
| See a World Others Don't: The Story Behind DPO See how DPOs can save you hours in your debugging process. |
| Serial Standards Guide This guide will show you which oscilloscope to select based on your serial standard's bit rate, with the performance level you need. |
| The Basics of Serial Data Compliance and Validation Measurements This primer explains the common aspects of serial data transmission and analog/digital measurement requirements of emerging serial technologies. |
| SignalVu Demonstration Guide: Bringing the Benefits of Vector Signal Analysis to Wideband Acquisitions with Stored Signals Understand the benefits of SignalVu with a DPO7000 or DPO/DSA70000 Series in: CW Tone, Wideband Radar, Hopping Waveforms, and Wideband Modulation. |
Following is a list of common probes and accessories. Don't see what you need? Visit the Probes & Accessories Advisor to find the right probe for your application.
| Active Probes | ||
| TAP3500 | 3.5 GHz TekVPI active single-ended probe | Check List Price |
| TAP2500 | 2.5 GHz TekVPI active single-ended probe | Check List Price |
| TAP1500 | 1.5 GHz TekVPI active single-ended probe | Check List Price |
| P6243*6 | 1 GHz active probe | Check List Price |
| P6245*6 | 1.5 GHz active probe | Check List Price |
| Current Probes | ||
| TCP0150 | 20 MHz TekVPI™ AC/DC 150 A current probe | Check List Price |
| TCP0030 | 120 MHz TekVPI AC/DC 30 A current probe | Check List Price |
| TCP202*6 | DC coupled current probe | Check List Price |
| TCPA300/ TCPA400*6 |
1x passive probe 15 MHz | Check List Price |
| Differential Probes | ||
| TDP0500 | 500 MHz TekVPI high-voltage differential probe | Check List Price |
| TDP1000 | 1 GHz TekVPI high-voltage differential probe | Check List Price |
| TDP1500 | 1.5 GHz TekVPI high-voltage differential probe | Check List Price |
| TDP3500 | 3.5 GHz TekVPI high-voltage differential probe | Check List Price |
| P6247*6 | 1 GHz differential probe | Check List Price |
| P6248*6 | 1.5 GHz differential probe | Check List Price |
| P6330*6 | 3 GHz differential probe | Check List Price |
| P6246*6 | 400 MHz differential probe | Check List Price |
| Passive Probes | ||
| P6139A | 500 MHz, passive probe | Check List Price |
| P6101B | 1x passive probe 15 MHz | Check List Price |
| P5200/ P5205/P5210*6 |
1x passive probe 15 MHz | Check List Price |
| Low Capacitance Probes | ||
| P6158 | 3 GHz, 20x low C probe | Check List Price |
| High-voltage Probes | ||
| P5100/P6015A | High-voltage probes | Check List Price |
| DPOJET Jitter And Eye Diagram Analysis (Opt. DJA) | Simplifies identifying signal integrity concerns, jitter, and their related sources and provides the highest sensitivity and accuracy available for real-time oscilloscopes. |
| DDR Memory Bus Analysis (Opt. DDRA) | Automatically identify DDR1, LP-DDR1, DDR2, DDR3 and GDDR3 Reads and Writes and clearly see and analyze how analog anomalies are affecting your DDR/Memory. |
| Ethernet Compliance Test Solution (Opt. ET3) | Receive full PHY layer support for 10BASE-T, 100BASE-TX, and 1000BASE-T. Analog verification, automated compliance software, and device characterization solutions are all included. |
| FB-DIMM Compliance Test Solution (Opt. FBD) | Test the Receiver, Transmitter and Reference clock test points for compliance as per FB-DIMM standards. |
*To change the Country/Currency for products listed, please update your pricing preferences. Starting from prices do not include Value Added Tax (VAT) or sales tax, and, depending on the country, may or may not include customs duty, delivery and exchange rate variations.