Serial Component Monitor

WFM601

This product is no longer carried in our catalog.

Features

• Two serial digital component video inputs
• Waveform parade and overlay display
• Component vector display
• Tektronix Diamond color gamut display
• Tektronix Lightning and bowtie displays
• Waveform time and amplitude cursors
• EDH and data error reporting
• Picture display of Y channel
• RGB picture monitor outputs
• Eight user presets
• Three-year warranty

Tektronix Measurement products are manufactured in ISO registered facilities.

For additional information or to order, contact your local Tektronix representative.

Characteristics

Serial Digital Interface

Format: 270 Mb/s component. Complies with SMPTE 259M & CCIR656.

Input Type: Passive loop-through, 75 ohm compensated.

Return Loss: >/=25 dB 1-270 MHz.

Insertion Loss: </=1%

Transmission Bandwidth: 50 kHz-300 MHz ±1.0 dB

Loop-Through Isolation: >/=50 dB to 300 MHz.

Serial Receiver Equalization Range: Proper operation with coaxial cable up to 17 dB loss at 135 MHz.

Serial Video Diagnostics

Video Error Detection: Active picture & full field, field rate resolution. Complies with proposed SMPTE RP 165.

Alarm: Front panel alarm lamp warns that one of the following serial signal video format errors has occurred:

• EAV/SAV missing
• EAV/SAV placed incorrectly
• Line too long (>1716 words)
• Field too long
• Reserved values used improperly
• Bad line/field ID parity

External Reference

Input: Analog composite video or black burst

Return Loss: >/=40 dB to 6 MHz

Waveform Vertical Deflection

Deflection Factor: </=2%

Variable Gain Range: +12 dB to -6 dB

Frequency Response:
Luminance channel (Y): to 5.0 MHz </=2%
Color difference (Pb & Pr): to 2.5 MHz </=2%

Voltage Cursor Accuracy: ±0.5%

Field Rate Tilt: </=1%

Line Rate Tilt: </=1%

Waveform Horizontal Deflection

Sweep Timing Accuracy:
1 line: 5 µs/div, mag 0.2 µs/div, ±1%
2 line: 10 µs/div, mag 1.0 µs/div, ±1%
1 field: displays 1 full field
2 field: displays 2 full fields, and data between them

Sweep Linearity: ±1% center 10 divisions of sweep

Timing Cursor Accuracy: ±0.5%

Horizontal Position Range

Any portion of the synchronized sweep may be positioned on screen in all sweep modes.

Calibrator

Waveform Squarewave:
Amplitude: 1.0 V ±0.5%
Frequency: 100 kHz ±0.1%

Analog Audio Mode

Input: DC coupled differential

Full Scale Selection: 0, 4, 8, 12 dBm full scale, menu selected

Full Scale Accuracy: ±0.5 dB at 1 kHz

Maximum Input Voltage: ±8 V peak

Bandwidth: -3 dB, >/=500 kHz

X & Y Input Phase Matching: </=1 degrees at 20 kHz

Input Impedance: 20 kilohm nominal

Component Vector Mode

Vertical Bandwidth: 1.5 MHz ±100 kHz

Horizontal to Vertical Match: </=2 degrees at 500 kHz or 2 MHz

Vertical Gain Accuracy: ±1%

Horizontal Gain Accuracy: ±1%

Electronic Graticule Accuracy: ±1%

Display to Graticule Registration: </=0.25 box

Vector Display: Pb displayed on horizontal axis Pr on vertical axis

Lightning Mode

Vertical Gain Accuracy: ±2%

Electronic Graticule Display:
Y: displayed vertically
Pb: displayed horizontally on top half of display
Pr: displayed horizontally on bottom half of display

Bowtie Mode

Common Mode Rejection Ratio: >/=34 dB at 3 MHz

Electronic Graticule Display:
Y-Pb: displayed on the left half of the display
Y-Pr: displayed on the right half of the display

Transcoded RGB Outputs

Format: EBU/N10

Accuracy: Unity ±2%

RGB Output Impedance: Nominal 75 ohm

DC Level: Back porch clamped to 0 V

Power Source

Mains Voltage Range: 90-250 V

Mains Frequency: 50 or 60 Hz

CRT Display

Viewing Area: 80 x 100 mm

Accelerating Potential: Nominally 13.75 kV

Trace Rotation Range: > ±1 degree from horizontal

Graticule: Internal waveform graticule with variable illumination

Environmental

Temperature:
Operating: 0 to 50 degree C (+32 to +122 degree F)
Storage: -40 to + 75 degree C (-40 to +158 degree F)

Altitude:
Operating: to 15,000 ft (4572 meters)
Storage: to 50,000 ft (15,240 meters)

Vibration: Military specification Mil-T-28800D, Para 1.2.2, class 3

Mechanical Shock:
Nonoperating: 30 g's, 1/2 sine, 3 shocks per surface, 18 total

Transportation: Qualified under NSTA Test Procedure 1A, Category II (24 inch drop)

Humidity: 95% noncondensing up to 5 days

Safety

Designed to Meet or Exceed UL1244 Factory Mutual 3820 CSA Standard 231 IEC 348

EMI

Designed to Meet or Exceed FCC EMI Compatibility FCC Rules Part 15, (Subpart J, Class A) VDE 0871.5 (Class B)

Physical Characteristics

Dimensions:
Width: 215.9 mm (8.5 in.)
Height: 133.4 mm (5.25 in.)
Depth: 460.4 mm ( 18.125 in.)
Net Weight: 3.8 kg (8 lb.)
Shipping Weight: 7.2 kg (15.7 lb.)

Ordering Information

WFM601 Serial Component Monitor
Includes: an instruction manual, power cable, spare graticule lamps, spare fuse, and spare air filters. White (P4) CRT phosphor is standard. To meet safety listing requirements order a cabinet or rack mount from the Optional Accessories list.

Opt. A1: Universal Europe locking power cord, 220 VAC

Opt. A2: United Kingdom power cord, 240 VAC

Opt. A3: Australia power cord, 240 VAC

Opt. M2: Remedial Service Support

Opt. M8: Calibration Service

Optional Accessories

Plain Cabinet: No handle or feet. Order 1700F00

Portable Cabinet: With handle, feet, tilt bail and front panel cover. Order 1700F02

Dual Rackmount: Adjustable front panel depth. Order 1700F05

Blank Panel: For unused half of dual rack mount. Order 1700F06

Drawer: For unused half of dual rack mount. Order 1700F07

Viewing Hood: Order 16-0475-00

Front Panel Cover: Order 200-3897-01

Camera. Order C9 Opt. 20