I need a printer which will work with the TDS1000 and TDS2000 series. What printers and graphics formats do the TDS1000 and TDS2000 Series support?

I need a printer which will work with the TDS1000 and TDS2000 series. What printers and graphics formats do the TDS1000 and TDS2000 Series support?

Unfortunately, there are far too many printers available in the market to maintain a comprehensive compatibility list for every printer manufacturer. Please check the printer information document for some model numbers.

An alternate method to using a printer with a Centronics port is to purchase a printer which can read a compact flash cards and the TDS2MEM module for the scope. Then you can save your pictures to TDS2MEM compact flash card then print them direct from the printer, no cable required. The only requirement for the printer is that it recognizes one of the graphics formats that which is produced by the scope and module. These are BMP, PCX, TIFF, RLE, and EPS image. This allows you to print the pictures and also have an electronic record of the screen shot if needed.

Note: TDS2MEM will not work on the TDS1001 and TDS2004 models. TSD2MEM is no longer available, and there are no replacements.