MDO4000C Mixed Domain Oscilloscope

MDO4000C Mixed Domain Oscilloscope

The most powerful mixed domain oscilloscope, the MDO4000 combines up to six instruments including options like a function generator and a built-in spectrum analyzer. Unlike any other instrument, it can synchronize RF, analog and digital channels – giving unprecedented insight into your design.

Base Price
US $6,900 - US $17,400
Questions? Chat Now
Bandwidth

Up to 1 GHz

Record length

20 Mpoints

Analog channels

4

Sample Rate

Up to 5 GS/s

 

More than just a powerful scope

Thumbnail

Engineering designs today are a complex mix of processors, serial buses, and wireless interfaces. At the core of the MDO4000C is a reputable Tektronix oscilloscope paired with an expandable platform. Customize it to your testing needs. Add 16 logic channels, a 50 MHz arbitrary/function generator, protocol analysis, and an integrated true hardware 3 or 6 GHz spectrum analyzer to help tackle complex designs challenges.

Highlights

  • Integrated triggered acquisition system - over 125 trigger combinations in the time AND frequency domains
  • 20 Mpoint record length with Wave Inspector® controls
  • True spectrum analyzer hardware enables real spectrum analysis
  • Expandable functionality ensures usefulness well into the future

Accurate Measurements Matter

tek00010_502_377.jpg

Put simply, the MDO Series scopes are designed to make the most accurate measurements in the industry – providing an unrivaled view into your designs. The MDO4000C takes measurements on actual acquisition data, while many other instruments only offer a snapshot view by taking measurements on display data. It doesn’t end there. We guarantee more specifications than many of our competitors, ensuring the MDO4000C will give you total confidence in your measurements. After all, measurement accuracy impacts design integrity. Why settle for anything less than precise?

Industry Leading Probes – included with every purchase.

MDO4104_TPP100 probe_8447_502_502.png

When examining the measurement signal path, probes are a key element that cannot be overlooked. When you buy an MDO4000C the industry’s best probes are included in the price. Featuring industry-best loading of 3.9 pF and bandwidth matched to your oscilloscope, the TPP-series probes will be your go-to probe for everyday use.

Highlights

  • TPP-series probes included standard, one per analog channel
  • Industry-best capacitive probe loading of 3.9 pF
  • 500 MHz or 1 GHz probe bandwidth to match the scope’s bandwidth

Wireless Measurements - at a whole new level

Thumbnail

Whether RF measurements make you smile or cringe, the MDO4000C oscilloscope with integrated hardware spectrum analyzer and SignalVu-PC software has you covered. Unlike oscilloscopes that offer FFT “spectrum analysis,” the MDO4000C with true spectrum analyzer provides a triggered acquisition system that is integrated across analog, digital and spectrum analyzer channels. You can perform RF measurements up to 6 GHz, and correlate events in the frequency domain with the time domain phenomena that caused them.

Highlights

  • Available 3 or 6 GHz spectrum analyzer option
  • Industry’s only true integrated spectrum analyzer hardware
  • Spectrum analysis time-synchronized with analog and digital waveforms

Competitive Comparison

Tektronix-MDO4000C-Series-Oscilloscope.png

MDO4000C Series
Oscilloscope

InfiniiVision-4000-X-Series-Oscilloscopes.jpg

InfiniiVision 4000 X-Series
Oscilloscope

20 M points on 4 channels, max

Record Length

2 M points on 4 channels, max

On waveform data

Measurements

On displayed data

Dedicated hardware spectrum analyzer

Spectrum Analyzer

None.
Uses gated FFT on oscilloscope input

9 kHz to 6 GHz

RF Frequency Range

Max. range limited by horizontal time scale
<15 GHz

Up  to 1 GHz - 1 year warranty

Included Passive Probes

700 MHz - 90 day warranty

3.9 pF

Probe Capacitive Loading

9.5 pF

 

Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Spectrum Analyzer Function Generator Output List Price
MDO4024C 200 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $6,900
Configure & Quote
MDO4034C 350 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $10,700
Configure & Quote
MDO4054C 500 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $14,100
Configure & Quote
MDO4104C 1 GHz 2.5 - 5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $17,400
Configure & Quote
ModelMDO4024C
List PriceUS $6,900
Analog BandwidthSample RateRecord Length
200 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4034C
List PriceUS $10,700
Analog BandwidthSample RateRecord Length
350 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4054C
List PriceUS $14,100
Analog BandwidthSample RateRecord Length
500 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4104C
List PriceUS $17,400
Analog BandwidthSample RateRecord Length
1 GHz2.5 - 5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Spectrum Analyzer Function Generator Output List Price
MDO4024C 200 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $6,900
Configure & Quote
MDO4034C 350 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $10,700
Configure & Quote
MDO4054C 500 MHz 2.5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $14,100
Configure & Quote
MDO4104C 1 GHz 2.5 - 5 GS/s 20 Mpoints 4 16 (optional) Up to 6 GHz

1 (optional)

US $17,400
Configure & Quote
ModelMDO4024C
List PriceUS $6,900
Analog BandwidthSample RateRecord Length
200 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4034C
List PriceUS $10,700
Analog BandwidthSample RateRecord Length
350 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4054C
List PriceUS $14,100
Analog BandwidthSample RateRecord Length
500 MHz2.5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

ModelMDO4104C
List PriceUS $17,400
Analog BandwidthSample RateRecord Length
1 GHz2.5 - 5 GS/s20 Mpoints
Analog ChannelsDigital ChannelsSpectrum Analyzer
416 (optional)Up to 6 GHz
Function Generator Output

1 (optional)

  Tektronix
MDO4000C
Tektronix
MDO3000
Keysight
4000 X-Series
LeCroy
HDO4000
R&S
RTE1000 Series
R&S
RTM2000 Series
Bandwidth 200 MHz to 1 GHz 100 MHz to 1 GHz 200 MHz to 1.5 GHz 200 MHz to 1 GHz 200 MHz to 1 GHz 200 MHz to 1 GHz
Upgradeable Bandwidth Yes Yes Yes -- -- Yes
Analog Channels 4 2 or 4 2 or 4 2 or 4 2 or 4 2 or 4
Analog Sample Rate Up to 5 GS/s Up to 5 GS/s Up to 5 GS/s Up to 2.5 GS/s Up to 5 GS/s Up to 5 GS/s
Standard Record Length (All Channels) 20 M 10 M 2 M 12.5 M 10 M 10 M
Integrated Arbitrary/Function Generator 50 MHz (opt) 50 MHz (opt) 20 MHz (opt) -- -- --
Integrated Logic Channels (MSO) 16 (opt) 16 (opt) 16 (opt) 16 (opt) 16 (opt) 16 (opt)
Integrated Hardware Spectrum Analyzer Up to 6 GHz (opt) Up to 3 GHz (opt) -- -- -- --
Full Synchronization of Analog, Digital and RF Yes -- -- -- -- --
Standard Probes Up to 1 GHz Passive Up to 1 GHz Passive Up to 700 MHz Passive Up to 500 MHz Passive Up to 500 MHz Passive Up to 500 MHz Passive
Standard Warranty 3 years 3 years 3 years 3 years 3 years 3 years

 

Embedded Serial Bus Trigger, Decode and Analysis

I2C_with_Digital.png

A single serial bus signal often includes address, control, data, and clock information; making isolating events of interest difficult. The serial application modules for the MDO4000C series transform the oscilloscope into a robust tool for debugging serial buses with automatic trigger, decode, and search.

Highlights

  • I2C, SPI, RS-232 / 422 / 485 / UART
  • CAN/CAN FD, LIN, FlexRay
  • I2S/LJ/RJ/TDM
  • MIL-STD-1553 , USB, Ethernet

Power Measurements and Analysis

Power_Quality_Table.png

The quest for ever-higher energy efficiency is placing new demands on designers and test instruments alike. Standby power constraints, higher switching speeds and signal ranges, lower-leakage semiconductor devices are pushing test conditions to new extremes. The MDO4000C offers power test solutions to address these ever evolving requirements.

Highlights

  • Power loss measurement at switching device
  • Measurement and analysis of ripple and noise
  • Characterization of power semiconductor devices
  • Debugging active power factor correction circuits

Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC)

Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC)

When performing design EMI/EMC testing, there is always risk it will fail; leading to schedule and budget issues. The MDO4000C with built-in spectrum analyzer, and time correlation of analog, digital and RF signals enables you to perform pre-compliance testing in your lab - greatly improving the probability of a successful first pass of full EMI compliance testing.

Automotive Buses – CAN/CAN FD Trigger, Decode & Analysis

Auto Communication

The technical requirements of today’s automobiles require more sophisticated and sensitive electronic components and systems than ever. With six instruments in one, the Tektronix MDO4000C was developed to help meet the challenges for testing and verification of these advanced technologies. Now a single instrument can be used for:

  • Debugging & verifying CAN FD, CAN, LIN and FlexRay
  • High power testing for hybrid/electric vehicles
  • Verifying in-car wireless systems
  • New component eval (MEMS sensors, LED drivers, LEDs

 

Low Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TAP1500

Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TCP0020 Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard Configure & Quote
TCP0030A

Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard

Configure & Quote
TCP0150 Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP0500

Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
TDP1000

Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
THDP0100

Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
THDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
TMDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200

Configure & Quote
Isolated Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TIVH02

Differential Probe; 200 MHZ, 1X/5X/10X/25X/50X/ 100X/250X/500X/1000X, +/- 1 kV, TekVPI, 3 Meter Cable

Configure & Quote
TIVH02L

Differential Probe; 200 MHZ, 1X/5X/10X/25X/50X/ 100X/250X/500X/1000X, +/- 1 kV, TekVPI, 10 Meter Cable

Configure & Quote
TIVH05

Differential Probe; 500 MHZ, 1X/5X/10X/25X/50X/ 100X/250X/500X/1000X, +/- 1 kV, TekVPI, 3 Meter Cable

Configure & Quote
TIVH05L

Differential Probe; 500 MHZ, 1X/5X/10X/25X/50X/ 100X/250X/500X/1000X, +/- 1 kV, TekVPI, 10 Meter Cable

Configure & Quote
TIVH08

Differential Probe; 800 MHZ, 1X/5X/10X/25X/50X/ 100X/250X/500X/1000X, +/- 1 kV, TekVPI, 3 Meter Cable

Configure & Quote
TIVH08L

Differential Probe; 800 MHZ, 1X/5X/10X/25X/50X/100X/250X/500X/1000X, +/- 1 kV, TekVPI, 10 Meter Cable

Configure & Quote
TIVM1

Differential Probe; 1 GHZ, 1X/5X/10X/20X/50X, +/- 50V, TekVPI, 3 Meter Cable

Configure & Quote
TIVM1L

Differential Probe; 1 GHZ, 1X/5X/10X/20X/50X, +/- 50V, TekVPI, 10 Meter Cable

Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0502

Passive Probe: 500 MHz, 2X, TekVPI

Configure & Quote
TPP1000

Passive Probe: 1 GHz, 10X, TekVPI

Configure & Quote
High Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0850

High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI

Configure & Quote
Data SheetAccessoryDescription
119414600 PROBE SET; RF MEASUREMENT,NEAR FIELD PROBE SET,PASSIVE,HAND HELD
119660900 ANTENNA; RUBBER COVERED,W/BNC CONNECTOR,KD4 VHF,UNTUNED,RUBBER CAP GLUED ON
HCTEK54 Hard Carrying Case
RMD5000 Rackmount Kit
TPA-N-PRE External Preamp., TPA Connector, SMA input
TPA-N-VPI Probe adapter from Type-N connector to TekVPI
TitleTypeDate
Do we get a Spectrum Analyzer equal to the analog bandwidth with a purchase of the MDO4000C?
No, all MDO4000C come without Spectrum Analyzer (SA) options. For flexability you can now order the base unit and add either option MDO4SA3 (3GHz RF channel) or MDO4SA6 (6GHz RF channel). When MDO4SA3 or MDO4SA6 is NOT ordered, the oscilloscope comes with…
FAQ ID: 72131 15 Dec 2015
When analog bandwidth is upgraded on a MDO4000C do we get new probes?
MDO4000C scopes with or less than 500MHz analog bandwidth come standard with TPP0500B 500MHz passive probes, one per channel. If upgrade to 1GHz analog bandwidth you will receive TPP1000 1GHz passive probes that come with the upgrade. 
FAQ ID: 72126 15 Dec 2015
Is Analog BW upgradable on the MDO4000C and can it be upgraded in the field?
Yes, the MDO4000C analog bandwidth has upgradable bandwidth options. Once purchased it does require a new calibration at Tektronix Service Center. 
FAQ ID: 72121 15 Dec 2015
How do I save and load a reference waveform to a DPO/MSO3000 series oscilloscope?
This Video will explain how to setup, save and load a reference waveform. It can be done through a USB flash drive or by internal memory.This method for using reference waveforms can be applied to all MSO/DPO2000, MSO/DPO3000, MSO/DPO/MDO4000 series…
FAQ ID: 64641 15 Dec 2015
How do I utilize the XY display feature on a DPO/MSO/MDO4000 Series oscilloscope?
The XY display format can be used to measure the phase relationship between two or more synchronous signals. This measurement technique involves inputting one signal into the vertical system as usual and then another signal into the horizontal system –…
FAQ ID: 64666 15 Dec 2015
How do I set up a Ethernet bus decode
Make sure your setup is prepared to decode, that you have the needed probes, scope options, test boards, etc. Once you have the options it's important to know how to use the options and probe your signal. To setup Ethernet bus decoding, turn on your bus,…
FAQ ID: 64731 15 Dec 2015
How do I configure the LAN settings on an MDO4000C series oscilloscope?
This procedure also applies to the DPO/MSO/MDO4000B series oscilloscopes. As it stands now, all 4000 series scopes  require a live network connection  be made on the scope in order to set and save LAN settings. If the scope does not have a network…
FAQ ID: 66236 15 Dec 2015
I could not find any information regarding the increase in bits in resolution for HiRes mode. Is there any information available?
The increase in bits in resolution depends on the decimation ratio.  The decimation ratio can be determined as follows:D = MFs / FsMFs is the maximum non-interleaved sampling frequency of the scope.  For example: 5 GS/s for the DPO4104B or 2.5 GS/s for…
FAQ ID: 55421 15 Dec 2015
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use.Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes (via a TPA…
FAQ ID: 56016 15 Dec 2015
Companies such as National Instruments and LeCroy sell USB-to-GPIB adapters. How do their adapters compare to the TEK-USB-488?
The products from National Instruments (GPIB-USB-B or GPIB-USB-HS) and LeCroy (WS-GPIB) are USB host to GPIB device adapter. These would be used for instruments that have a GPIB interface with controllers that have a USB port. The TEK-USB-488 was designed…
FAQ ID: 56456 14 Dec 2015
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top