6 Series MSO Mixed Signal Oscilloscope

New

6 Series MSO Mixed Signal Oscilloscope

Troubleshoot and validate high-speed designs now and into the future with upgradeable bandwidth that starts at 1 GHz and goes up to 8 GHz . Get accurate measurements with low noise and 25 GS/s sample rate per channel -- sample rate does not drop as you turn on channels.  

Bandwidth

Up to 8 GHz

Sample Rate

25 GS/s per channel

Record Length

Up to 250 Mpoints

Vertical Resolution

12 bits

Lowest noise at high sensitivity

缩略图

>75% reduction in noise from a typical oscilloscope at 1mV/div

See signals you couldn't see before.

  • Lowest input noise enabled by new TEK061 front-end ASICs.
  • 12-bit resolution at 4 GHz, and up to 16-bit resolution at 200 MHz
Thumbnail Watch the science behind the low noise

Advanced measurements and analysis made easy

Thumbnail
Thumbnail
Thumbnail
Thumbnail

Characterize jitter on GHz clocks and serial buses with ease. Effortlessly bring statistics into your everyday toolkit with integrated advanced measurements. For example, use the same drag and drop action for jitter or advanced power analysis as routine rise time and rms measurements.

  • Advanced Jitter Analysis
  • Advanced Power Analysis
  • Memory Analysis and Debug
  • High-speed Serial Compliance
  • Automated Measurements and Trend Analysis
  • Spectrum View frequency domain display

Signal fidelity starts with probes

Thumbnail

Enter a world of versatility with four FlexChannel® inputs. Browse your circuits with included 1 GHz, 10x probes. Connect high performance single-ended active probes or differential probes, or do both at once with new TriMode probes. Expand your view by connecting a TLP058 probe to any input and get 8 digital channels - up to 32 digital channels.

  • 1 MΩ and 50 Ω input terminations
  • Four 1 GHz low-loading passive probes, included
  • New TDP7700 Series 4, 6 and 8 GHz Trimode probes
  • New TAP4000 & TDP4000 4 GHz single-ended & differential probes

FlexChannel Input

1 high resolution analog input

8 digital logic inputs per channel

Touchscreen that works

  • 15.6 inch, ultra-responsive touchscreen
  • Pinch/zoom/swipe
  • Button and mouse operation

Confidence in numbers

Input Channels
4 FlexChannel inputs.
Each FlexChannel provides 1 analog signal input or 8 digital logic inputs with TLP058 probe

Bandwidth 1
1, 2.5, 4, 6, or 8 GHz

Sample Rate
25 GS/s on all analog/digital channels

Record Length 1
Up to 250 Mpoints on all analog/digital channels

Signal Generator 1
Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

Digital Voltmeter 2
4 digit

Trigger Frequency Counter 2
8 digit

Display
15.6-inch (385 mm)
TFT color HD (1920 x 1080) resolution Capacitive (multi-touch) touchscreen

1 - Optional and upgradeable
2 - Free with product registration

Add functionality or performance as your needs change

  • Add Bandwidth up to 8 GHz
  • Increase Record Length up to 250 Mpoints on each channel
  • Add Logic Probes for up to 32 Digital Channels
  • Add Windows 10 Operating System
  • Add an Arbitrary / Function Generator
  • Add advanced analysis: serial decode/trigger, power, jitter, memory analysis and debug, and automated compliance testing

New features and options make the best scopes better

NEW Options

Free upgrades on instruments with advanced analysis options

  • Bode Plot and Power Supply Rejection Ratio Measurements using built-in Arbitrary/Function Generator (option 6-AFG) added to Advanced Power Measurement and Analysis (option 6-PWR)
  • CAN (.dbc) symbolic decoding added to Automotive Serial Triggering and Analysis (option 6-SRAUTO)
  • New 10/100BASE-T measurements added to Ethernet Compliance Testing (option 6-CMENET)

Free upgrade on all instruments

  • Spectrum View - spectrum views for each analog input channel with independent time- and frequency-domain controls
  • Fixed/movable graticule user preference
  • User-selectable waveform colors

Already have a 6 Series? Get your update.

Download new firmware

What's in the box?

  • 4 TPP1000 1 GHz, low-C passive probes
  • 1-year warranty on the included probes
  • 3-year warranty on the instrument
  • Mouse, power cord and front cover with attached accessory pouch
  • Printed Installation Manual covers safety and basic operation
  • Comprehensive Integrated Online Help
  • Certificate of traceability
Configure & Quote

Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Function Generator Output List Price
MSO64

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

4

Up to 32 (optional)

1 (optional)

-
Configure & Quote
Model MSO64
Analog BandwidthSample RateRecord Length

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

Analog ChannelsDigital ChannelsFunction Generator Output

4

Up to 32 (optional)

1 (optional)

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Function Generator Output List Price
MSO64

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

4

Up to 32 (optional)

1 (optional)

-
Configure & Quote
Model MSO64
Analog BandwidthSample RateRecord Length

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

Analog ChannelsDigital ChannelsFunction Generator Output

4

Up to 32 (optional)

1 (optional)

  Tektronix
6 Series MSO
Tektronix
5 Series MSO
Keysight
S-Series
Rohde & Schwarz
RTP Series
Rohde & Schwarz
RTO Series
LeCroy
WavePro HD
Detailed Comparison -- -- Fact Sheet Fact Sheet Fact Sheet Fact Sheet
Bandwidth Ranges 1 GHz to 8 GHz 350 MHz to 2 GHz 500 MHz to 8 GHz 4 GHz to 8 GHz 600 MHz to 6 GHz 2.5 GHz to 8 GHz
Bandwidth (on four channels) 8 GHz 2 GHz 4 GHz 8 GHz 4 GHz 4 GHz
Upgradeable Bandwidth Yes Yes Yes Yes Yes No
Number of Analog Channels 4 4, 6, or 8 4 4 2 or 4 4
Channel Input Impedance 50 Ω, 1 MΩ 50 Ω, 1 MΩ 50 Ω, 1 MΩ 50 Ω 50 Ω, 1 MΩ 50 Ω, 1 MΩ
Analog Sample Rate (on four Channels) Up to 25 GS/s Up to 6.25 GS/s Up to 10 GS/s Up to 20 GS/s Up to 20 GS/s Up to 10 GS/s
Standard Record Length (on four Channels) 62.5 Mpts 62.5 Mpts 100 Mpts 50 Mpts 50 Mpts 50 Mpts
Integrated Arbitrary/Function Generator 50 MHz (opt) 50 MHz (opt) None None 100 MHz (opt.) None
Digital / Logic Analysis Channels (MSO) Up to 32 (opt) Up to 64 (opt) 16 (opt.) 16 (opt.) 16 (opt.) 16 (opt)
Waveform Capture Rate (wfms / Sec) >500,000 >500,000 >1,100 950,000 >1,000,000 Not Available
RMS Noise, 1mV/div, at 1 GHz, 4GHz, 8GHz 60 µV, 97 µV, 169 µV 254 µV, NA, NA 90 µV, 153 µV, 260 µV NA, 270 µV, 430 µV 100 µV, 240 µV, NA NA, 228 µV, 315 µV
ADC Resolution 12 bits 12 bits 10 bits 8 bits 8 bits 12 bits
Operating System Embedded OS
Windows 10 (opt)
Embedded OS
Windows 10 (opt)
Windows 10 Windows 10 Windows 7 Windows 10
Standard Probes 1 GHz Passive
3.9 pF loading
Up to 1 GHz Passive
3.9 pF loading
500 MHz Passive
9.5 pF loading
None 500 MHz Passive
10 pF loading
500 MHz Passive
10 pF loading
Standard Warranty 3 years 3 years 1 years 3 years 3 years 3 years

Power Supply Analysis

Thumbnail

Make reliable, repeatable power quality, harmonics, switching loss, safe operating area measurements and more, with the automated power measurement and analysis. Save time with SPMI decoding and triggering. And rely on the 6 Series MSO low-noise performance for accurate evaluations of power supply noise.

Highlights

  • Power quality and harmonics
  • Switching loss and safe operating area
  • In-circuit inductor and transformer analysis
  • SPMI power management bus decoding and triggering

Jitter Analysis

Thumbnail

Clocks are the heart of every embedded system and digital communication link. Jitter and other clock distortion can impact system operation, and getting to the root cause can be challenging without the right analysis tools.

Highlights

  • Standard phase noise, TIE, and frequency plots and histograms
  • Optional advanced analysis with jitter decomposition and clock recovery

Serial Standards Compliance Testing

Thumbnail

Systems depend on fast, reliable data transfer. And high speed digital standards rely on rigorous test procedures to ensure that reliability. Automated compliance testing software manages the whole testing process with the 6 Series MSO -- setup, making measurements, checking against standard limits, and generating thorough reports.

Highlights

  • Ethernet 10/100/1000BASE-T
  • Ethernet XGBT Compliance
  • Ethernet NBASE-T Compliance
  • USB 2.0
  • MIPI D-PHY 1.2
  • Automotive Ethernet 100/1000BASE-T1
Data SheetSoftware Package / Software OptionDescriptionConfigure and Quote
Opt. 6-AFG

Add built-in Arbitrary/Function Generator

Contact Us
Opt. 6-CMAUTOEN

Automotive Ethernet (100Base-T1, 1000Base-T1) automated compliance test application

Contact Us
Opt. 6-CMDPHY

MIPI D-PHY 1.2 compliance test solution

Contact Us
Opt. 6-CMENET

Ethernet (10/100/1000BASE-T) compliance test solution

Contact Us
Opt. 6-CMNBASET

Ethernet (2.5/5GBASE-T) compliance test solution

Contact Us
Opt. 6-CMUSB2

USB2.0 automated compliance test application (Requires TDSUSBF USB test fixture). ≥2.5 GHz bandwidth required for high-speed USB

Contact Us
Opt. 6-CMXGBT

Ethernet (10GBASE-T) compliance test solution

Contact Us
Opt. 6-DBDDR3

DDR3/LPDDR3 analysis and debug solution

Contact Us
Opt. 6-DJA

Simplifies identifying signal integrity concerns, jitter and their related sources and provides the highest sensitivity and accuracy available for real-time oscilloscopes

Contact Us
Opt. 6-PS2

Power Solution Bundle (6-PWR, THDP0200, TCP0030A, 067-1686-XX deskew fixture)

Contact Us

Access Digital Channels

Upgrade Description Purchasing Details
TLP058 Logic Probe Each probe accesses 8 digital channels on any FlexChannel input Request a quote on this probe

Add Instrument Functions

Upgrade Description Purchasing Details
SUP6-AFG Add arbitrary function generator Request trial license

Request a quote
SUP6-DVM Add digital voltmeter / trigger frequency counter Software upgrade license file provided upon registration.
Register now.
SUP6-RL-1 Extend record length to 125 Mpts / channel Request trial license

Request a quote
SUP6-RL-1T2 Extent record length from 125 Mpts/channel to 250 Mpts/channel Request trial license

Request a quote
SUP6-RL-2 Extend record length to 250 Mpts / channel Request trial license

Request a quote
SUP6-WIN Add removable solid state drive with Windows 10 license installed. No trial available

Request a quote

Add Protocol Analysis

Upgrade Description Purchasing Details
SUP6-SRAERO Aerospace serial triggering and analysis (MIL-STD-1553, ARINC429) Request trial license

Request a quote
SUP6-SRAUDIO Audio serial triggering and analysis (I 2S, LJ, RJ, TDM) Request trial license

Request a quote
SUP6-SRAUTO Automotive serial triggering and analysis (CAN, CAN FD, LIN, FlexRay) Request trial license

Request a quote
SUP6-SRAUTOSEN Automotive sensor serial triggering and analysis (SENT) Request trial license

Request a quote
SUP6-SRCOMP Computer serial  triggering and analysis (RS-232/422/485/UART) Request trial license

Request a quote
SUP6-SREMBD Embedded serial triggering and analysis (I 2C, SPI) Request trial license

Request a quote
SUP6-SRENET Ethernet serial triggering and analysis (10Base-T, 100Base-TX) Request trial license

Request a quote
SUP6-SRI3C MIPI I3C decoding and analysis Request trial license

Request a quote
SUP6-SRPM Power Management serial triggering and analysis (SPMI) Request trial license

Request a quote
SUP6-SRUSB2 USB 2.0 serial bus triggering and analysis (LS, FS, HS) (≥ 1 GHz model recommended for HS) Request trial license

Request a quote

Add Serial Compliance Testing

Upgrade Description Purchasing Details
SUP6-CMAUTOEN Automotive Ethernet (100Base-T1 and 1000BASE-T1) automated compliance test solution Request trial license

Request a quote
SUP6-CMUSB2 USB 2.0 automated pre-compliance test solution Request trial license

Request a quote
SUP6-CMENET Ethernet (10/100/1000BASE-T) compliance test solution Request trial license

Request a quote
SUP6-CMDPHY MIPI D-PHY 1.2 compliance test solution Request trial license

Request a quote
SUP6-CMNBASET Ethernet (2.5/5GBASE-T) compliance test solution Request trial license

Request a quote
SUP6-CMXGBT Ethernet (10GBASE-T) compliance test solution Request trial license

Request a quote

Add Advanced Analysis

Upgrade Description Purchasing Details
SUP6-DJA Advanced jitter and eye analysis Request trial license

Request a quote
SUP6-PWR Power analysis Request trial license

Request a quote

Upgrade Bandwidth

Upgrade Description Purchasing Details
SUP6-BWxTy4 MSO64 bandwidth upgrade from x to y, where x and y are the hundreds of MHz  

Add Memory Debug

Upgrade Description Purchasing Details
SUP6-DBDDR3 DDR3 memory debug solution Request trial license

Request a quote
Low Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TAP1500 Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
TAP2500 Active Probe: 2.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
TAP3500

Active Probe: 3.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
TAP4000

4 GHz, Single Ended Probe with TekVPI interface

Configure & Quote
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TCP0020 Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard Configure & Quote
TCP0030A Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard Configure & Quote
TCP0150 Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP0500

Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
TDP1000 Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI Configure & Quote
THDP0100 Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE Configure & Quote
THDP0200 Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE Configure & Quote
TMDP0200 Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200 Configure & Quote
Low Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP1500 Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI Configure & Quote
TDP3500 Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI Configure & Quote
TDP4000

4 GHz, Differential Probe with TekVPI interface

Configure & Quote
TDP7704

4 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
TDP7706

6 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
TDP7708

8 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
Isolated Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TIVH02

IsoVu optically isolated differential probe, 200 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH02L

IsoVu optically isolated differential probe, 200 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH05

IsoVu optically isolated differential probe, 500 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH05L

IsoVu optically isolated differential probe, 500 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH08

IsoVu optically isolated differential probe, 800 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH08L

IsoVu optically isolated differential probe, 800 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVM1

IsoVu optically isolated differential probe, 1 GHz, TekVPI, 3 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips

Configure & Quote
TIVM1L

IsoVu optically isolated differential probe, 1 GHz, TekVPI, 10 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips

Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0502 Passive Probe: 500 MHz, 2X, TekVPI Configure & Quote
TPP1000 Passive Probe: 1 GHz, 10X, TekVPI Configure & Quote
High Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0850 High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI Configure & Quote
Power Rail Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPR1000

1 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit

Configure & Quote
TPR4000

4 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit

Configure & Quote
Data SheetAccessoryDescription
HC5 Hard transit case for the 5 and 6 Series MSO
RM5 Rackmount kit for the 5 and 6 Series MSO
SUP6-WIN

Removable SSD with Windows license on 6 Series oscilloscopes

Learn how to check power supply control loop stability using Bode plots on an oscilloscope.  Find out how to measure phase margin and gain margin using a 5 or 6 Series MSO with automated power supply…
0h 6m 12s
Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an…
0h 1m 27s
If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels,…
0h 6m 0s
How independent time and frequency controls beat traditional FFTs.
0h 6m 19s
Find out how 4 channels at maximum bandwidth and maximum sample rate can speed your debugging of multi-lane, serial buses such as PCI Express or DDR3.
0h 1m 4s
Watch how easy it is to get measuring on the 6 Series MSO oscilloscope with it's intuitive interface and large touchscreen.
0h 1m 27s
See how the 6 Series MSO utilizes the TekVPI™ probe interface which supports a wide range of probing solutions. 
0h 1m 40s
See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO oscilloscope.
0h 6m 15s
Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering on…
0h 3m 14s
Are you confident your oscilloscope is displaying your true signal and not internal noise generated by your testing equipment?
0h 1m 29s
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - MSO 5/6 Series - V1.1.0
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with faster…
Part number: 066196752
Application
6 Series MSO (non-Windows) Firmware - V1.14.13
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that do not have option 6-WIN (Windows 10) installed.
Part number: 066198501
Firmware
5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64) Programmer Manual
This document describes the remote access programming commands for the MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.14.
Part number: 077130506
Programmer
Solutions for Aerospace and Defense
Military / Government BrochureFor over 70 years Tektronix has offered a range of electronic test and measurement solutions designed to address the unique needs of military and government applications. Learn more about our range of solutions in this brochure.
Literature number: 46A-61169-2
Brochure 03 May 2019
6 Series MSO Specifications and Performance Verification
For firmware version 1.0 and above. This document contains the specifications and performance verification procedures for the 6 Series MSO instruments.
Part number: 077146102
Performance Verification
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.8
Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp?-2016) standard for Transmitter electrical test specification as per Open Alliance. The…
Part number: 066186013
Application
Keysight S-Series vs. 6 Series MSO Mixed Signal Oscilloscope Comparison
This fact sheet compares important specifications and features of the Tektronix 6 Series MSO Mixed Signal Oscilloscope to those of the Keysight S-Series.
Literature number: 48W-61424-2
Competitive 16 Apr 2019
6 Series MSO
Mixed Signal Oscilloscope Datasheet With the lowest input noise and up to 8 GHz analog bandwidth, the 6 Series
MSO provides the best signal fidelity for analyzing and debugging today's
embedded systems with GHz clock and bus speeds. The remarkably
innovative pinch-swipe-…
Literature number: 48W-61353-7
Datasheet
Linux Source Code - Linux Source Notice
For our Linux based instruments or programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the source…
FAQ ID: 64866 08 Apr 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix.
Literature number: 46W-31080-5
Selection Guide 07 Apr 2019
6 Series MSO (Windows OS) Firmware - V1.14.13
Download this firmware to install the latest updates for the 6 series MSO oscilloscopes. This firmware only applies to oscilloscopes that have option 6-WIN (Windows 10) installed.
Part number: 066198601
Firmware
5/6 Series MSO MSO54, MSO56, MSO58, MSO58LP, MSO64 Printable Application Help
This is a printable version of the 5/6 Series MSO (MSO54, MSO56, MSO58, MSO58LP, MSO64) on-instrument help system. Supports firmware version 1.14.x.
Part number: 077130305
Primary User
Debugging CAN, LIN and FlexRay Automotive Buses with an Oscilloscope
Explains the physical layer basics of CAN, LIN, and FlexRay serial buses to troubleshoot bus problems or system issues.  Learn how to use automated decoding, triggering, and search on an oscilloscope equipped with automotive bus analysis capability.
Literature number: 55W-61098-3
Application Note 25 Mar 2019
Serial Support Using Tektronix Oscilloscopes and Optional Software
Tektronix oscilloscopes offer a portfolio of optional analysis capabilities to simplify serial bus debug or compliance verification. This selection matrix shows which serial standards are supported by each of the oscilloscope series.
Literature number: 55W-29028-11
Selection Guide 25 Mar 2019
5 and 6 Series MSO Mixed Signal Oscilloscopes Brochure
5 and 6 Series MSOs offer the largest displays and the greatest user experience of any oscilloscope.  This 4-page brochure gives an overview of the platforms, with the similarities and differences between the two.
Literature number: 48W-61430-2
Brochure 25 Mar 2019
6 Series MSO Upgrade Guide
Most of the features of the 6 Series MSO are field-upgradable, including bandwidth, record length, arbitrary/function generator, logic channels, and protocol support. This 2-page fact sheet lists all available post-purchase upgrades.
Literature number: 48W-61429-2
Fact Sheet 25 Mar 2019
Is it possible to establish a peer to peer ethernet connection on the 5/6 Series MSO?
Yes. To setup a peer to peer connection, you must manually configure the IP and subnet mask address on both the scope and your computer. You can then use an ethernet cable connected directly between the scope and computer.  This will work on the Linux and…
FAQ ID: 474351 20 Mar 2019
How can I ungroup the channel badge on the 5/6 Series MSO?
On firmware v1.12 or above, the 5/6 Series MSO added the stacked and overlay mode mix and match feature.  It allows user to group multiple channels for overlay mode for easy comparison. To separate the channels in the group, there are couple options. 1…
FAQ ID: 773401 20 Mar 2019
Where can I find the positive/negative pulse count on the 5/6 Series MSO?
Currently, there is no auto measurement for the positive or negative pulse count on the 5/6 Series MSO. The workaround would be using the “Search” feature to search for the pulse width. First, set up for the positive pulse width auto measurement for the…
FAQ ID: 773396 20 Mar 2019
How do I set up a network drive on my 5 Series MSO or 6 Series MSO?
Introduction Network drives were introduced in firmware version 1.8.7 for 5 Series, 5 Series Low Profile, and 6 Series MSOs.  This feature allows you to specify a directory on another computer for the scope to use as storage.  To access this storage, or…
FAQ ID: 773296 18 Mar 2019
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top