Frequently Asked Questions

FAQ FAQ ID Sort ascending
Do the TLA7PG2's P6470 TTL/CMOS and P6471 ECL probes require external user power to operate?No external user power is required. All power for the probes is supplied by the TLA7PG2 pattern generator module.
This FAQ applies to:
TLA7PG2
59246
Do the output drivers of the P6470 TTL/CMOS probe have 3-state control?Yes.
This FAQ applies to:
TLA7PG2
59241
Do either probes also provide clock and/or strobe signals along with the data outputs?Yes both clock and/or data strobe signals are provided; however, you can only select one or the other, not both simultaneously.
This FAQ applies to:
TLA7PG2
59216
Can the TLA7PG2 modules be merged to form a wider logic module+ much like my logic analyzer modules can be merged? How many modules can be merged into one larger logical module? Any speed restrictions for merged modules?Yes, you can merge up to five TLA7PG2 pattern generator modules. The merging is accomplished using one of the backplane connectors so that no special connector like that used on the logic analyzer modules is required. There are no speed restrictions for merged modules.
This FAQ applies to:
TLA7PG2
59171
Can the output signal levels of the P6470 TTL/CMOS probe be changed via menu control?Yes, the positive voltage rail is 2.0V to 5.5V and the negative rail is ground.
This FAQ applies to:
TLA7PG2
59161
Are there any configuration considerations or restrictions I need to know about before I use the TLA7PG2 pattern generator module with my other existing modules?No.
This FAQ applies to:
TLA7PG2
59101
Are there any calibration or deskew procedures that I need to take into considerations before I start using the TLA7PG2 pattern generator modules?No.
This FAQ applies to:
TLA7PG2
59096
Any configuration considerations with the TLA7XM expansion mainframes?No.
This FAQ applies to:
TLA7PG2
59081
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top