Produktsupport und Downloads

Willkommen beim Tektronix-Produktsupport

Wir freuen uns, den ganzen Tag mit Ihnen über Technik zu sprechen, aber wir wissen, dass Sie es eilig haben. Daher haben wir es Ihnen leicht gemacht, Handbücher, Datenblätter und Software für alle unsere aktuellen Produkte und viele nicht mehr verfügbare Produkte herunterzuladen. Sagen Sie uns einfach, welches Produkt Sie verwenden, und wir zeigen Ihnen alles, was wir haben.

Das von Ihnen ausgesuchte Produkt kann derzeit gekauft werden. Außerdem stehen die folgenden Supportinformationen zur Verfügung.

Datenblatt	Literaturnummer	Veröffentlichungsdatum
NRZ-M4 Optical Manufacturing TDEC Analysis Software The Tektronix NRZ-M4 application provides NRZ signaling analysis, including TDEC (Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use application. This application …	85W-61522-0	17 Jan 2019
400G Optical Manufacturing Analysis Software The DSA8300 400G-M4 is a PC based application for PAM4 optical signal validation. The 400G-M4 application supports four channel simultaneous acquisition and integrated receiver equalization with support for both auto optimization and user defined …	61W-61365-2	25 Jun 2020

ECOC 2014 Verification and Test of 56Gb-s

During ECOC 2014, Tektronix demonstrated 56 Gb/s Eye Diagram analysis on a DSA8300 Sampling Oscillocope.

Dauer: 2m 10s

ECOC 2014 PAM4 Analysis for Design Validation

See how to conduct PAM-4 Analysis using PPG3204 Pattern Generator and DSA8300 Sampling Oscilloscope on multi-level eye diagrams.

Dauer: 2m 6s

40 Gb-s BERT Tester Solution

Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design …

Dauer: 4m 37s

32 Gb-s PAM4 Analysis

Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design …

Dauer: 2m 16s

TDR Analysis for S Parameter Creation

This webinar reviews TDR basics and the ability to create S-parameters using TDR/TDT measurements to validate high speed channels for debug or de-embedding in a Serial Data Link Analysis …

Dauer: 21m 50s

400G Networking and 28GBd56GBd Testing Are you Ready

With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …

Dauer: 18m 33s

The Ultimate in Optical Sensitivity

Learn how more margin and higher yields are made possible with lowest optical noise, highest sensitivity solution available today. See comprehensive characterization – TDECQ accuracy and …

Dauer: 1m 33s

Interoperability is Key

At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …

Dauer: 3m 27s

ECOC 2016 New PAM4 Modules for the DSA8300 Digital Sampling Oscilloscope

At this booth, we're demonstrating our DS8300 Digital Sampling Oscilloscope including new PAM4 software modules.

Dauer: 2m 10s

Tektronix test of 100G networks at OIF Interop OFC2013

View this demonstration of interoperability at OFC2013 using Tektronix DSA8300 Sampling Oscilloscope and BSA286C BERTScope. Tektronix assisted the Optical Internetworking Forum (OIF) and member …

Dauer: 4m 56s

OIF-CEI Active Optical Cable Testing

Designing and developing 100G components, modules and systems requires the latest tools and techniques. In this video, you'll learn how to:Set up a complete system for active optical cable …

Dauer: 2m 7s