Live Chat with Tek representatives. Available 6:00 AM - 4:30 PM PST.
PSPL5331 6 dB Power Divider, 18 GHz Datasheet
The products on this datasheet are no longer being sold by Tektronix. Contact Technical Support for alternative products View Tektronix Encore for used test equipment Check support and warranty status for these products Find more support information for these products
The PSPL5331 6 dB Power Divider is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals or for combining two signals. The output is attenuated by 6 dB. These are impedance-matched tees that present a 50 Ω input impedance when both outputs are terminated in 50 Ω. Power Divider tees are built using three 16.7 Ω resistors and thus present a 50 Ω impedance at any port. The resistors in this tee have 1% tolerances and thus this tee has excellent symmetry and very close impedance match to 50 Ω. It has a rise time of 17 ps and bandwidth from DC to >18 GHz.
Frequency responses from 40 MHz to 20 GHz, linear sweep at 2 GHz/div
|Rise time||17 ps|
|Insertion Loss Bandwidth (-3 dB)||DC to 18 GHz|
|Insertion Loss, DC||6.0 dB ±0.05 dB maximum|
|Insertion Loss, AC||6.0 dB ± 0.5 dB maximum for f|
|Insertion Loss, Asymmetry||0.05 dB, maximum, DC|
|Input Impedance, DC||50 Ω, ± 0.4 Ω maximum|
|S11 Return Loss||See S11 plots for typical responses vs. frequency|
|Max Input Power, average||0.75 W|
|Power Temp Curve||Full power-up to +70 °C, linearly derated to 0 W at +125 °C|
|Peak Power||50 W, t|
|Temperature Range||-55 to +125 °C, operating and storage|
|Connectors||SMA jacks (f)|
- Mechanical dimensions
1 All parameters listed are typical unless max/min guaranteed limits are provided. The DC specs are based on resistor tolerances and only when used with 50 Ω source and terminations.
- Power Divider, 6 dB