TMDP0200 - THDP0200 - THDP0100 - P5200A - P5202A - P5205A - P5210A

High-voltage Differential Probes

Read Online:

Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.

Key performance specifications
  • Bandwidths up to 200 MHz
  • Up to 6000 V differential (DC + pk AC)
  • Up to 2300 V common (RMS)
Key features
  • Overrange Indicator
  • Safety Certified
  • Switchable Attenuation
  • Switchable bandwidth limit
Applications
  • Floating measurements
  • Switching power supply design
  • Motor drive design
  • Electronic ballast design
  • CRT display design
  • Power converter design and service
  • Power device evaluation
Connectivity
  • BNC interface (P5200A probes)
  • TekVPI® interface (TMDP and THDP Series probes)
  • TekProbe® interface (P5202A, P5205A, and P5210A Series probes)

Safe high-voltage probe solutions

The THDP0100 and P5210A have the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.

The THDP0200 and P5205A are active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.

The TMDP0200 and P5202A are designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

Warning: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

Connectivity options

The TMDP and THDP Series probes are equipped with the TekVPI®interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls. These probes are designed to operate on TekVPI®oscilloscopes without requiring the TPA-BNC adapter.

The P52xxA Series probes are equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe®interface or to any oscilloscope when used with the 1103 TekProbe®Power Supply.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview
Probes with the TekVPI® interface
  TMDP0200 THDP0200 THDP0100
Attenuation 25X / 250X 50X / 500X 100X / 1000X
Differential Voltage 250X: ±750 V
25X: ±75 V
500X: ±1500 V
50X: ±150 V
1000X: ±6000 V
100X: ±600 V
Common Mode Voltage ±750 V ±1500 V ±6000 V
Maximum Input Voltage-to-Earth 550 V CAT I
300 V CAT III
1000 V CAT II
600 V CAT III
2300 V CAT I
1000 V CAT III
Bandwidth 200 MHz 200 MHz 100 MHz
Rise Time
Slew Rate
Input Impedance at the Probe Tip 5 MΩ || 10 MΩ || 40 MΩ ||
Typical CMRR DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
Cable Length 1.5 m 1.5 m 1.5 m
Probes with the BNC and TekProbe® interface
  P5200A P5202A P5205A P5210A
Attenuation 50X / 500X 20X / 200X 50X / 500X 100X / 1000X
Differential Voltage 500X: ±1300 V
50X: ±130 V
200X: ±640 V
20X: ±64 V
500X: ±1300 V
50X: ±130 V
1000X: ±5600 V
100X: ±560 V
Common Mode Voltage ±1300 V ±640 V ±1300 V ±5600 V
Maximum Input Voltage-to-Earth 1000 V CAT II 450 V CAT l
300 V CAT ll
1000 V CAT II 2300 V CAT l
1000 V CAT III
Bandwidth 50 MHz 100 MHz 100 MHz 50 MHz
Differential Input Impedance 10 MΩ || 2 pF 5 MΩ || 2 pF 10 MΩ || 2 pF 40 MΩ || 2.5 pF
Input Impedance between each Input and Ground 5 MΩ || 4 pF 2.5 MΩ || 4 pF 5 MΩ || 4 pF 20 MΩ || 5 pF
Typical CMRR DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >30 dB
50 MHz: >26 dB
DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >40 dB
50 MHz: >30 dB
Cable length 1.8 m

Thumbnail

1. The differential voltageis the maximum measurable range between the (+) and (-) input leads of the probe. Beyond these limits, the output could be clipped.

2. The maximum common mode voltage and maximum input voltage-to-earth (RMS) are the maximum voltages that each input lead (+/-) can be from ground.

Ordering information

Standard accessories
P5200A, P5202A, and P5205A

Description Quantity included Reorder part number
Hook clips 1 set of red and black hook clips AC280-FL
Pincer clips 1 set of red and black pincer clips AC283-FL
Alligator clips 1 set of red and black alligator clips AC285-FL
Extension cables 1 set of red and black extension cables 196-3523-00 
TMDP0200 and THDP0200

Description Quantity included Reorder part number
Hook clips AC280-FL
Pincer clips AC283-FL
Alligator clips AC285-FL
Extension cables 196-3523-00 
Test leads TP175-FL
High voltage differential browser THV-BROWSER
Probe holder TPH1000
THDP0100 and P5210A

Description Quantity included Reorder kit part number
Probe tips 020-3070-00 
Large hook clips
Small hook clips
Probe and Accessory Derating Table

Common mode, relative to ground, when used with P52xxA Series probes

Accessory Description TMDP0200 / P5202A

450 V CAT I

300 V CAT II

THDP0200 / P5200A / P5205A

1000 V CAT II

600 V CAT III

THDP0100 / P5210A

2300 V CAT I

1000 V CAT III

196-3523-00  2x Extender Leads (1.5 m) 2300 V CAT I
1000 V CAT III
Standard 450 V CAT I
300 V CAT II
Standard 1000 V CAT II
600 V CAT III
Standard 2300 V CAT I
1000 V CAT III
AC280-FL 2x Hook Clips 1000 V CAT III
600 V CAT IV
Standard 450 V CAT I
300 V CAT II
Standard 1000 V CAT II
600 V CAT III
Optional 1000 V CAT I
1000 V CAT III
AC283-FL 2x Pincer Clips 1000 V CAT III
600 V CAT IV
Standard 450 V CAT I
300 V CAT II
Standard 1000 V CAT II
600 V CAT III
Optional 1000 V CAT I
1000 V CAT III
AC285-FL 2x Alligator Clips 1000 V CAT III
600 V CAT IV
Standard 450 V CAT I
300 V CAT II
Standard 1000 V CAT II
600 V CAT III
Optional 1000 V CAT I
1000 V CAT III
020-3070-00  Hook Clip Kit 2300 V CAT I
1000 V CAT II
Optional 450 V CAT I
300 V CAT II
Optional 1000 V CAT II
600 V CAT II
Standard 2300 V CAT I
1000 V CAT II
TP175-FL 2x Test Leads 1000 V CAT III
600 V CAT IV
Standard (TMDP0200) 550 V CAT I
300 V CAT III
Standard (THDP0200) 1000 V CAT II
600 V CAT III
Optional 2300 V CAT I
1000 V CAT III
Options
Power plug options (P5200A only)
Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A3
Australia power plug (240 V, 50 Hz)
Opt. A4
North America power plug (240 V, 50 Hz)
Opt. A5
Switzerland power plug (220 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 50/60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A12
Brazil power plug (60 Hz)
Opt. A99
No power cord
Service options
Opt. C3
Calibration Service 3 Years
Opt. C5
Calibration Service 5 Years
Opt. D1
Calibration Data Report
Opt. D3
Calibration Data Report 3 Years (with Opt. C3)
Opt. D5
Calibration Data Report 5 Years (with Opt. C5)
Opt. R3
Repair Service 3 Years (including warranty)
Opt. R5
Repair Service 5 Years (including warranty)
Opt. SILV200
Standard warranty extended to 5 years

Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and calibration terms.

Last Modified: 2017-05-12 05:00:00
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top