LabVIEW SignalExpress Step for AFG2021

This Step provides the capability to connect, control and log data from the AFG2021 instrument from the Signal Express Environment.

Version: V1.3
Software Type: Application

Release Date: Dec 01 2012 - 08:00 am
Part Number: 076030500

Release Notes

Instructions

Release Notes

************************************************************************************
* LabVIEW SignalExpress Step for Tektronix AFG2021 Release Notes                   *
*                                                                                  *
************************************************************************************
Version: 1.3
Major feature: Supports AFG2K
Date: Sep 2012

This file contains information about using the Tektronix AFG2K
SignalExpress Step. These Steps allow you to control your instrument.

Prerequisites
1. NI LabVIEW SignalExpress Tektronix Edition software
2. NI-VISA

NI-VISA is automatically installed when LabVIEW SignalExpress is installed.

Steps for using the Step:
1. Run the setup.exe provided as part of Step Installer.

2. Open the LabVIEW SignalExpress Tektronix Edition software.

3. Click "Add Step" in the LabVIEW SignalExpress Tektronix Edition main menu and
select Tektronix-> Generate signals -> AFG 2000

4. The Step appears in the Project View of Signal Express and is ready to be used.

5. Connect the AFG2021 to your PC.

Note: You can check the connection to your Instrument using the Measurement &
Automation Explorer or the TekVISA OpenChoice Instrument Manager.

6. Next, select the device in the LabVIEW SignalExpress step by selecting the
"VISA Resource" tab and selecting the device in the "VISA Resource Name" drop down list.
At this point, the interface is ready for use.

Instructions

Installation Instructions

Product:  LabVIEW SignalExpress Step for Tektronix AFG2021
Version:	1.3
Last Revised:	Sep , 2012

Installation Instructions:

1. Save the download file to your hard drive. Make note of where you save it.

2. Double click the downloaded file to launch installer.
Follow the instructions shown in the Installer Window.

3. You may delete the downloaded executable when the installation is complete.

************************
* Contacting Tektronix *
************************

If you have any questions, please contact the Tektronix Technical Support Center:

Phone			1-800-833-9200*
Address			Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR, 97077
USA
Web site		www.tektronix.com
Sales support		1-800-833-9200, select option 1*
Service support		1-800-833-9200, select option 2*
Technical Support	Email: techsupport@tektronix.com
1-800-833-9200, select option 3*
6:00 a.m - 5:00 p.m. Pacific time
--------------------------------------------------------------------------------
* This number is toll free in North America. After office hours, please leave a voice mail message.
Outside North America, contact a Tektronix sales office or distributor;
see the Tektronix web site for a list of offices.

By downloading, you agree to the terms and conditions of the Software Download Agreement.

This software applies to: AFG2021

LabVIEW SignalExpress Step for AFG2021

Release Notes

Instructions

Related Product Information