DPO7000 Series Support Center

DPO7000 Data Sheet

User Manuals

• DPO7000, DPO70000, DSA70000, DPO70000B, DSA70000B, MSO70000 Series
  Download Type: Manuals --> This manual describes the installation and operation of DPO7000 Series, DSA70000/B Series, DPO70000/B Series and MSO70000 Series instruments.
• 016-1979-01 and above
  Download Type: Manuals --> This document supports Tektronix DPO7000, DPO70000, DPO70000B, DSA70000, DSA70000B, MSO70000, AWG5000, and AWG7000 Series instruments. The Front Hard-Drive kit (016-1979-xx) is a collection of parts that, once installed, configure the instrument with a remote-removeable hard drive in a standard 19-inch equipment rack.
• SignalVu Essentials
  Download Type: Manuals --> The SVE Vector Signal Analysis software transforms a digital oscilloscope into an analysis tool for measuring and analyzing RF signal behavior.
• View More »

Application Notes and Technical Documents

• Tektronix USB Testing Solution
  Download Type: Application Notes and Technical Documents --> Tektronix USB Testing Solution for Electrical Validation & Compliance Test, Signal Path Characterization, Digital Validation & Debug
• Correlation of 10GBASE-T Linearity Measurements on the Oscilloscope and Spectrum Analyzer
  Download Type: Application Notes and Technical Documents --> Read about the purity results of the DAC (used at the output) in a recent measurement conducted on transmitter linearity via Spurious Free Dynamic Range
• Power Supply Measurement and Analysis with DPOPWR and TDSPWR3 Application Software
  Download Type: Application Notes and Technical Documents --> Feeling the pressure to improve power efficiency of your design? You are not alone. Today’s power supply designers are faced with increasing pressure to achieve power conversion efficiencies of 80% and even higher. Read this application note, to discover how Tektronix’ DPOPWR power analysis software can help you meet the demands for longer battery life and “greener” designs.
• View More Application Notes and Technical Documents »

Frequently Asked Questions

• My Tektronix TDS6xxx, TDS7xxx, DPO7xxxx can't run the application like TDSET3 software and the software stuck at "long operation"?
  
• How can I add reference for the IVI-COM driver in C# or VB.NET?
  
• What is required to add the VM6000 software to a DPO7000 series oscilloscope?
  
• View More Frequently Asked Questions »

Firmware Upgrades

• DPO7000 DPO-DSA70000 DPO-DSA70000B FIRMWARE V4.3.5 - NO DOC
• DPO7000 DPO-DSA70000 DPO-DSA70000B FIRMWARE V4.3.5 - WITH DOC

Application Software

• 10GBASE-T Automation Solution for DPO or DSA-based Oscilloscopes V1.0.0
• TDSUSB2 USB2 COMPLIANCE TEST SOFTWARE V3.5.0
• TDSJIT3 JITTER ANALYSIS SOFTWARE v3.0.3
• TDSET3 ETHERNET COMPLIANCE TEST SOFTWARE V3.1.2
• DPOJET V2.3.0 WITH USB3, PCIE AND DDR MODULES, LICENSE REQUIRED
• TDSDVI DVI COMPLIANCE TEST SOLUTION V3.0.7
• REPORT GENERATOR FOR OPTIONAL APPLICATIONS V3.1.3
• ULTRA-WIDEBAND SPECTRAL ANALYSIS V2.2.1
• WAVESTAR UPGRADE FOR OSCILLOSCOPES
• DPOPWR POWER MEASUREMENT SOFTWARE v1.0.6

View More »

Find Accessories

• Probe Selector
• Probe Replacement Parts