Firmware Update version 4.0.5 supports the following

Option 3G and Option JIT address the growing need for monitoring of 3G Single Link SDI formats in Post Production and Content Delivery.

Option 3G provides all the basic monitoring capability normally associated with SD/HD SDI including Picture, Waveform, Vector, Gamut, Audio, Error Logging and Session Displays.

Option JIT enables the user to effectively monitor jitter components in the 3G Single Link Environments. The built in 3G Test Loop Generator provides 100% Color Bars, 75% Color Bars and Pathogenic Test Patterns.

Dolby E and Dolby D audio monitoring capabilities (Option DDE) can now be added to the WFM7020 waveform monitor or the WVR7020 waveform rasterizer.

B. New Feature Enhancements

• PHYSICAL LAYER MEASUREMENTS
  • Automated Eye Overshoot/Undershoot Measurements
  • Eye Histogram
  • AVD Delay Measurements for Analog or Digital Formats
  • Offset to compensate for known delays
• COLOR SPACE
  • Dual Link 2K Format XYZ Color Space Support Opt. DL Required
• AUDIO
  • Audio Channel Status Display Opt. AD or DDE required.
  • Audio Loudness & Peak Measurement (ITU BS.1770 compliant) Opt. AD or DDE required
  • Dolby E Audio/Video Timing and Synchronization Measurement Opt. DDE required
  • VANC Dolby Metadata Display (Evertz & Norpak Implementation) Opt. DDE required
  • Dolby CRC Error Checking Opt. DDE required.
  • Audio/Video Delay Measurement Enhancement Opt. AVD required.
  • Dolby Monitoring support now available on the WFM/WVR7020
• ANC Data Analysis
  • EIA 708 Closed Caption Decode
  • Teletext Detect and Decode
    • Closed Caption /Subtitle Only)
  • Active Format Description (AFD) Decode in ANC (SMPTE 2016)
  • Video Index Decode
    • Aspect Ratio Only (SMPTE RP186)
  • Wide Screen Signaling (WSS) Decode (Both PAL & Digitized SD-SDI (ITU-BT-1119-02)
• ADDITIONAL PERFORMANCE ENHANCEMENTS
  • Analog pixmon output works in 720p and 1080 low frame rate formats

Note: Opt. 3G also allows the end user to view Dual Link signals in the combined mode.

In order to view Link "A" and Link "B" Dual Link signals simultaneously (side-by-side) Opt. SIM is required.

The table below cross references these options and significant new feature enhancements described in the introduction by model:

Note: For additional information regarding specific performance improvements and bug fixes please refer to the release notes included with the Firmware Download.