MTS4EA ELEMENTARY STREAM ANALYSIS SOFTWARE, Demo Release V6.1.0.17

MTS4EA ELEMENTARY STREAM ANALYSIS SOFTWARE V6.1.0.17: 30-DAY EVALUATION VERSION.

Version: V6.1.0.17
Software Type: Application

Release Date: Jun 10 2011 - 07:00 am
Part Number: 063389104

Release Notes

Instructions

Release Notes

*******************************************************************************

Tektronix

MTS4EA Elementary Stream Analyzer
Release Notes
077-0302-02
DATE: May 24, 2011

This document supports software version 6.1.0.
www.tektronix.com

Copyright Tektronix. All rights reserved. Licensed software products are owned
by Tektronix or its subsidiaries or suppliers, and are protected by national
copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending.
Information in this publication supersedes that in all previously published
material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA

For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

*******************************************************************************

Contents
________

* Major Changes
* Minor Changes
* Known Issues
* Platforms

Major Changes
_____________

Version 6.1.0:

(1) Support for analysis of scalable video codec (SVC)

(2) Compatibility with JSVM 9_19 decoder

(3) Support for following SVC profiles:
a. Scalable Baseline
b. Scalable High
c. Scalable High Intra

(4) Support for decoding of stream at a chosen scalability level

(5) Support for inter-layer fidelity Analysis in a given SVC stream

(6) Addition of graph for viewing AVC versus SVC MB percentages

Version 6.0.5:

(1) Support for changing Sequence Parameter Set and
Picture Parameter Set in H.264/AVC

Version 6.0.4:

(1) Support for AVC Intra.

Includes support for all the AVC Intra profiles:
High10 Intra, High422 Intra, High444 Intra, and
CAVLC Intra.

(2) Enhanced support for H.264/AVC

(3) Compatibility with JM 15.0 decoder

(4) Support for additional profile and level checks in H.264/AVC

Version 6.0.3:

(1) Support for AVCDecoderConfigurationRecord in mp4 container

Support for extensions to AVC Decoder Configuration Record
including Sequence Parameter Set

(2) Updates to dongle library

Version 6.0.2:

(1) H.264 Intermediate Transform Checks

This new mode adds checks to H.264/AVC streams to confirm
that the intermediate values produced as part of the Scaling
and Transformation Processes of sections 8.5.9 - 8.5.12 of
the standard are within range.

Version 6.0:

(1) Improved tracing functionality and views

The trace view has been reworked to provide more information, and
to make that information easier to use. The different trace types
are colour coded and can be filtered with a single click.
New trace options are:
i) Alert trace. The alert information now has its own trace, so
can be easily collected or ignored.
ii) Buffer trace. Buffer model figures for MPEG-2, MPEG-4 part 2
and H.264/AVC.
iii) Stream summary trace. Initial stream identification and final
stream statistics.

(2) ARIB TR-B14 compliance mode

This new mode adds a range of checks to H.264/AVC streams to confirm
the stream's conformance to the ARIB TR-B14 standard.

(3) In H.264/AVC:

i) Updated to the JM 12.0 code base.
ii) Added SEI message parsing to the Stream Structure view.

(4) In MPEG-4 part 2:

i) Added support for Simple profile levels 4a and 5.

(5) User interface enhancements:

i) New MB Statistics toolbar allows easy selection of overlays.

(6) New command line options for greater control and flexibility.

Version 5.0:

(1) Full stream analysis for audio streams of the following standards:

i) MPEG-1 part 3
ii) MPEG-2 part 3
iii) MPEG-2 part 7 (AAC)
iv) MPEG-4 part 3 (AAC, HE-AAC)

Note that analysis of Dolby AC-3 streams is not yet supported.

Analysis consists of a number of different trace options, bitstream editing,
histograms and plots relevant to each standard, together with alerts for
violations of the standards.

(2) Support for playback and Audio Waveform View for Dolby AC-3 streams.

(3) Bits Per Frame Analysis. A graphical view of bit usage and picture type.

(4) User interface improvements:

i) Can now close video view without closing the stream.
ii) More logical arrangement of buttons in Audio and Video toolbars.
iii) Some menu reorganisation due to new audio features.
iv) Improved icons for skip forward and skip backward.
v) Lock macroblock highlight. The position of the highlighed macroblock
may be locked and unlocked using a left mouse click.
vi) Better handling of multiple similar alerts.
vii) The alert log can be saved as XML.
viii) 'Goto view' functionality added to the H.264/AVC stream structure view.
ix) Buttons that generate a new view can be used to toggle that view.

(5) A/V Delay measurement.

This option allows the measurement of the delay between the Audio ES and
Video ES, providing a complete solution for measuring AV delay in an encoding
system. This option comes with a collection of predefined clapperboard test
streams in various formats, allowing users to select and encode an
appropriate test stream with their encoding system. The encoded stream is
then analyzed using MTS4EA. MTS4EA will measure the delay between audio and
video in the encoded stream and report it to the user as a time value to an
accuracy of ±1 mS. The variation between the Video ES and the Audio ES is
also presented as a graph.

Version 4.2:

(1) Seeking: decode start position can be specified as a byte offset or frame
number.

(2) Enhanced stream structure view: additional details shown in existing
stream structure view (for all supported container formats).

(3) H.264/AVC:

i) Support for MP4 file format (ISO/IEC 14496-15).
ii) Compatibility with JM 9.6 code base.
iii) Elementary stream structure tree view.

(4) VC-1: Support for FCD 1r2 version of the SMPTE standard.

(5) MPEG-2: Support for 4:2:2 profile ML and HL.

(6) Improved decode speed in all standards.

(7) User interface enhancements:

i) Button to open Excel graphs.
ii) Automatically disable analysis options on stop.
iii) Show first frame after loading file.
iv) Remove 'left-click to advance frame'.
v) 'Select all' button in trace view.

Version 4.0.0.5:

(1) Support for playback of audio streams:  the following audio standards are
supported:

i) MPEG-1 part 3
ii) MPEG-2 part 3
iii) MPEG-2 part 7 (AAC)
iv) MPEG-4 part 3 (AAC, HE-AAC)

(2) Audio waveform view: shows the time domain waveform of the decoded audio
stream.

(3) Bitstream editing: bitwise editing of video elementary streams, including
delete, insert and invert of individual bits; full change tracking and
change highlighting; edited stream can be decoded or saved to disk; syntax
element labels are shown in the editor.

(4) Image inspector: view the pixel values for each colour component of the
current highlighted macroblock; shows magnified image as well as decimal
values.

(5) A number of other enhancements:

i) When using an uncompressed reference input, the time based frame rate
can be ignored.
ii) H.264/AVC: frame time stamps are now derived from DPB SEI messages
when present.
iii) The fidelity graph has three alternative modes for x-axis labelling:
time, frames, or fields.
iv) In the alert log view, alerts can be copied to the Windows clipboard.
v) The decoded video output file can now be specified through the
analysis options dialog as well as the command line.

Version 3.1.1.0:

(1) Support for H.264/AVC fidelity range extensions: High, High 10, High
4:2:2, and High 4:4:4 profiles (all levels).

(2) H.264/AVC: Compatibility with JM 9.3 code base.

(3) VC-1: Support for RCV file format (SMPTE CD2r3 release).

(4) Incorporated changes for Microsoft Windows Media v9 RC-1 release.

Version 3.1.0.0:

(1) Support for Microsoft Windows Media v9/VC-1 (WMV9/VC-1) Simple, Main and
Advanced Profiles (all Levels).

(2) Support for Microsoft Advanced Systems Format (ASF) extraction for
WMV9/VC-1.

(3) Support for MPEG-2 Transport Stream (ISO/IEC 13818-1) extraction for
MPEG-2 and H.264/AVC Elementary Streams, and MPEG-2 PES and Program
Streams.

(4) H.264/AVC: added reporting of Reference frames in Summary Tooltip,
MacroBlock tooltip and Trace/Interpret.

(5) MPEG-4: updated to reflect 2004 ISO/IEC 14496-2:2004 edition.

(6) Colour maps for MacroBlock overlay statistics.

(7) Allow input type to be specified in file open dialog and in stream select
dialog.

Minor Changes
_____________

Version 6.1.0

(1) The window position of toolbars (including Macroblock and
Summary tooltips) are now stored in MTS4EA project files.

(2) Continuous play option is available when audio analysis is
selected

(3) In H.264/AVC:

i) Resolved the issue where pic_timing SEI message was not shown in the
stream structure view for some streams.
ii) Resolved the defect where some streams with invalid Ref picture list
were getting aborted with a Fatal alert "MTS4EA Elementary Stream
Analyzer encountered an unexpected system error".

Version 6.0.4

(1) In H.264/AVC:

i) Resolved the issue where analysis was stopped with
incorrect alert "Aborting slice due to previous error".
ii) Resolved the issue where MTS4EA was incorrectly
raising the alert "No space in Decoded Picture Buffer...".

(2) In the GUI:

i) Resolved the issue where average bit rate was displayed as
negative for some VC1 streams.

Version 6.0.2

(1) In H.264/AVC:

i) Fixed erroneous 'Unexpected end of NALU' alert for streams which
are missing a data partition NALU for a given slice.
ii) Corrected YUV output of streams using 10-bit weighted prediction.

(2) In H.263:

Added alert for unsupported 4CIF video resolution.

(3) In the GUI:

Fixed pauses when using a floating licence dongle over a WAN.

(4) Other:

Microsoft Vista is officially supported.

Version 6.0.1:

(1) In H.264/AVC:

i) Improved decode speed.
ii) Added alert for deprecated High 4:4:4 profile.
iii) Added support for new Amendment 2 SEI messages.
iv) Improved memory allocation for very large streams.
v) Corrected default value for time_offset_length syntax element.
vi) Added support for non 8-bit I_PCM blocks.
vii) Removed some restrictions that were being inappropriately applied
to FRExt streams.

(2) In MPEG-2:

Fixed incorrect alert concerning repeated values of vbv_buffer_size.

(3) In the GUI:

i) Minor improvements to the motion vector overlay.
ii) Fixed display of synchronisation markers for some ADTS streams.
iii) Fixed intra frame display in Bits per Frame view for interlaced streams.

(4) Other:

i) Added support for display of 4:1:1 raw video.
ii) Resolved some installation and graphical issues when using the
Microsoft Vista operating system. Note however that Vista is not an
officially supported OS for this release and issues may remain.

Version 6.0:

(1) In H.264/AVC:

i) New checks added for the VUI when an SPS is repeated.
ii) Improved decode speed.
iii) Fixed 'Aborting slice decode' problems with some streams.
iv) Updated the 'Too many macroblocks per second' alert to account for
the change in the 2005 edition of the standard.
v) Modified HRD calculations to avoid spurious alerts caused by rounding errors.
vi) Corrected misinterpretation of hypothetical field rate as a frame rate.
vii) Removed incorrect errors for out of range values of mb_qp_delta.
viii) Fixed incorrect parsing of pan-scan rectangle SEI message.

(2) In MPEG-2:

i) Corrected problems dealing with videos that try to switch between CBR and
VBR buffer models.
ii) Corrected timing issues for streams using repeated frames or fields.

(3) In MPEG-4:

i) Corrections to VBV analysis.
ii) Fixed video packet overlay view.

(4) In AC-3:

Allowed decoding of streams that do not start with a sync word.

(5) In VC-1:

Allowed decoding of streams that do not start at the beginning.

(6) In the GUI:

i) Resolved a number of issues with the image inspector.
ii) Fixed non-appearance of syntax elements in the bitstream editor for
some streams.

(7) Other:

i) Improved memory usage for large transport streams.
ii) New DESkey drivers provided that allow multiple instances to be run on a
machine while only using one floating licence.
iii) Improved stream auto detection algorithms to reduce false matches.

Version 5.0.0.1:

(1) In H.264/AVC:

i) Small correction to HRD conformance checking which could
alter results for some streams with buffering messages that
change the cpb_removal_delay_offsets.
ii) Removed skipping of AUD NAL units that occur at the start
of the stream.
iii) Correction for decoding unpaired fields in successive IDR
slices.
iv) Correction for incorrect error message for negative values of
quantisation parameters.
v) Correction for parsing time_offset syntax element in the pic_timing
SEI message.
vi) Fix for parsing of full_frame_freeze SEI message.
vii) Fix for incorrect warning about filler payloads in SEI messages
when the payload > 255 bytes.
viii) Fix for parsing of scene_info_present_flag in scene_info SEI messages.
ix) Fix where Intra8x8 blocks were being shown as Intra4x4 in the GUI
if they appeared in non I-slices.
x) Fix for checks dependent upon cpbBrNalFactor and cpbBrVclFactor in FRExt.
xi) Fix to the frame cropping calculation that is passed to the GUI.

(2) In VC-1:

i) Correction for motion vectors in 4MV blocks, both in the GUI
and in the trace.

(3) In MPEG-2:

i) Added support for transport streams with 4-bytes of
non-TS data between TS packets.
ii) Improved transport stream PSI parsing.
iii) Improved labelling of field- and frame-coded picture types in
summary tooltip.
iv) Improved accuracy of VBV analysis for some CBR streams.

(4) Updated DESkey driver.

(5) In MPEG-4:

i) Correction to value of interlaced top-field motion vector in
macroblock tooltip.

(6) In the GUI:

i) Fix for image inspector when viewing interlaced streams.
ii) Number of bits reported in trace now always matches the Summary Tooltip.

Version 4.2.0.0:

(1) In H.264/AVC:

i) Equation C-15 now only applied to access units with buffering period
SEIs.
ii) Intra_8x8 macroblock type now displayed with distinct colour in
overlay.

(2) In MPEG-4:

i) Removed upper limit on decode resolution.

Version 4.0.0.5:

(1) In H.264/AVC:

i) Increased maximum number of slices from 50 to 396.
ii) Correction to reference frame numbers in trace.
iii) Correction for fatal error when no_output_of_prior_pics_flag=1.
iv) Improved detail of HRD error messages.
v) Correction to handling of multiple PPSs.
vi) Support for parsing buffering period SEI message before PPS.
vii) Trace cabac_zero_word syntax elements where present.

(2) MPEG-2:

i) Improvement to identification of ADTS/AAC audio under MPEG-2 TS
partial reception streams.

(3) In MPEG-4:

i) Correction for handling large files.
ii) Relaxed error checking for incorrect marker bit.

(4) In MPEG-2 TS:

i) Improved stream description strings.

(5) In uncompressed video:

i) Correction for handling files larger than 4GB streams.

(6) In VC-1:

i) Correction for missing quant values.

(7) In the GUI:

i) Progress bar (with cancel) introduced for track select
identification process.

Version 3.1.1.0:

(1) In H.264/AVC:

i) Fix problem in CABAC streams where certain bitstream errors could
lead to incorrect decoding of when playback is repeated.
ii) Fixed incorrect interpretation of pan_scan_rect SEI message.

(2) In MPEG-4:

i) Video packet number now available as overlay statistic.
ii) Correction to motion compensation in quarter-sample interlace streams.

(3) In VC-1:

i) Correction to tracing of IMODE and MVMODE elements.
ii) Correction to MB trace when no quant is set.

(4) In the GUI:

i) Correction to display of average fidelity metrics for interlace
streams.

Version 3.1.0.2:

(1) In WMV9:

i) Added warning about pre-RC1 interlaced streams.
ii) Corrected some block level elements being traced out at macroblock
level (affects indentation and context, eg [PIC|MBK]).
iii) Improved startcode logging, plus tracing of SUBBLKPAT and HYBRIDPRED
elements (these were not always being output in the log).
iv) Correct display of field pictures where the frame is an odd number of
macroblocks high.
v) Corrected overlay for 4MV MBs in field coded pictures
vi) Fix loss of stream sync in pictures using extended MVs where mvrange
!= 0.
vii) Many additional alerts
viii) Range Reduction now being performed in Advanced Profile.
ix) Trace flushing bits.
x) Flush last frame on end of sequence.
xi) Fixed frame loss bugs for skip frames, and intensity-compensated
field interlace pictures.

(2) In ASF:

i) Support for the 'WVC1' four-CC as VC1 Advanced Profile.
ii) Correction to handling of compressed payloads.

(3) In MPEG-2:

i) Improved PES demux to allow non-video extraction and updated stream
types from 13818-1 Amd.2.

(4) In H.264/AVC:

i) Correction to parsing of filler data and user data SEI messages.

Version 3.1.0.0:

(1) Command line:

i) Added flags to enable fidelity analysis trace in batch mode.

(2) In MPEG-4:

i) 'Unexpected end of stream' error was being incorrectly reported with
files using the visual_object_sequence_end_code, this has now been
fixed.

(3) In H.264/AVC:

i) Changed colour of Intra_4x4 MacroBlock type to Yellow in MacroBlock
types overlay (to distinguish from Intra_16x16 types).
ii) Correction to motion vector range check: was comparing horizontal
component to both horizontal and vertical limits.
iii) Correction to handling leading zero bytes in Annex B NALU format.

(4) GUI:

i) Correction to motion vector overlay renderer: in rare cases, incorrect
clipping was causing a crash.

Version 3.0.0.5:

(1) In H.264/AVC:

i) Reduced level of "First access unit must be IDR" alert to error.

(2) In H.263:

i) Improved handling of GSTUF bits.

Known Issues
____________

(1) In H.264/AVC:

i) The prev_intra8x8_pred_mode_flag and rem_intra8x8_pred_mode syntax elements
are being wrongly traced as their 4x4 counterparts.
ii) Frame timings shown in the summary tooltip for streams with HRD information may
be incorrect. This does not affect the HRD calculations.
iii) There is an artificial limit of 396 on the number of slices that may be present
in a picture.

Platforms
_________

The software has been verified with the following platforms:

* Platform #1

Operating System: Windows XP

* Platform #2

Operating System: Windows 7

* Platform #3

Operating System: Windows Server 2008

Instructions

By downloading, you agree to the terms and conditions of the Software Download Agreement.

This software applies to: MTS4EA